manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 175

3-95

Con

venient f

e

atur

es of y

our v

ehicle

3

Parking lamp position (

)

The parking lamp, license plate lamp
and instrument panel lamp are turned
ON.

Headlamp position (

)

The headlamp, parking lamp, license
plate lamp and instrument panel
lamp are turned ON.

Information 

The ignition switch button must be in
the ON position to turn on the head-
lamp.

High beam operation

To turn on the high beam headlamp,
push the lever away from you. The
lever will return to its original position.
The high beam indicator will light
when the headlamp high beams are
switched on.
To turn off the high beam headlamp,
pull the lever towards you. The low
beams will turn on.

i

OIG046471L

OIG046472L

OIG046470L

Do not use high beam when there
are other vehicles approaching
you. Using high beam could
obstruct the other driver's vision.

WARNING  

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands