manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 449

7-61

7

Maintenance

Information

If the main fuse is blown, even though
the engine compartment panel fuse
and inner fuse are not blown, if the
electrical system is not operated, the
main fuse may be blown. The main
fuse is connected with other parts and
system. We recommend that you con-
tact an authorized HYUNDAI dealer.

Multi fuse

If the multi fuse is blown, it must be
removed as follows:
1. Disconnect the negative battery

cable.

2. Remove the nuts shown in the pic-

ture above.

3. Replace the fuse with a new one

of the same rating.

4. Reinstall in the reverse order of

removal.

Information

If the multi fuse is blown, we recom-
mend that you consult an authorized
HYUNDAI dealer.

i

i

OIG076028

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands