manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 186

3-106

Convenient features of your vehicle

Vanity mirror lamp

Opening the lid of the vanity mirror will
automatically turn on the mirror light.

To prevent unnecessary charging
system drain, close the vanity mir-
ror cover after using the mirror.

Puddle lamp (if equipped)

Welcome light

When all doors (and trunk) are
closed and locked, the puddle lamp
will come on for 15 seconds if the
door is unlocked by the smart key or
outside door handle button.

For more details, refer to "Welcome
System" in this chapter.

Escort light

When the ignition switch is in the
OFF position and the driver's door is
opened, the puddle lamp will come
on for 30 seconds. If the driver's door
is closed within the 30 seconds, the
puddle lamp will turn off after 15 sec-
onds. If the driver's door is closed
and locked, the puddle lamp will turn
off immediately.
The Puddle Lamp Escort Light will
turn on only the first time the driver's
door is opened after the engine is
turned off.

NOTICE

OLF044258

OIG046428

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands