manualshive.com logo in svg

Hyundai Atos, Owner'S Manual

The Hyundai Atos Owner's Manual is an essential guide for all Atos owners. This comprehensive manual provides detailed instructions and information on maintenance, troubleshooting, and operating your vehicle. Download it for free at manualshive.com, ensuring you have the necessary knowledge to get the most out of your Hyundai Atos.

Share
Download
background image

EMISSION CONTROL SYSTEMS

  7-1

H010A01A-GAT

EMISSION CONTROL SYSTEM
(Not all models)

Your Hyundai is equipped with an emission
control system to meet all requirements of the
Emission prohibition rules of your province.
There are three emission control systems which
are as follows.

1) Crankcase emission control system
2) Evaporative emission control system
3) Exhaust emission control system

In order to assure the proper function of the
emission control systems, it is recommended
that you have your car inspected and main-
tained by an authorized Hyundai dealer in ac-
cordance with the maintenance schedule in this
manual.

ZH000A1-A

7. EMISSION

CONTROL
SYSTEMS

H010B01A-AAT

1. Crankcase Emission Control Sys-

tem

The Positive Crankcase Ventilation System is
employed to prevent air pollution caused by

blow-by gases being emitted from the crank-
case. This system supplies fresh filtered air to
the crankcase through the air intake hose.
Inside the crankcase, the fresh air mixes with
blow-by gases, which then pass through the
PCV valve and into the induction system.

H010D01A-AAT

3. Exhaust Emission Control System

The Exhaust Emission Control System is a
highly effective system which controls exhaust
emission while maintaining good vehicle perfor-
mance.

H010C02A-GAT

2. Evaporative Emission

Control System (Not all models)

The Evaporative Emission Control System is
designed to prevent fuel vapors from escaping
into the atmosphere.

Canister

While the engine is inoperative, fuel vapours
generated inside the fuel tank are absorbed and
stored in the onboard canister. When the en-
gine is running, the fuel vapors absorbed in the
canister are drawn into the induction system
through the purge control solenoid valve.

Purge Control Solenoid Valve

The purge control solenoid valve is controlled
by the ECM; when the engine coolant temper-
ature is low, and during idling, it closes, so that
evaporated fuel is not taken into the engine.
After engine warm-up, during ordinary driving, it
opens so as to introduce evaporated fuel to the
engine.

H020A01A

Catalytic Converter

H020A01A-GAT

CATALYTIC CONVERTER
(Not all models)

The catalytic converter is part of the exhaust
emission control system. Its purpose is to re-
move certain engine emission products from
the engine’s exhaust. It looks something like a
muffler and is located underneath the car in the
exhaust system.

7

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments

Related manuals for Atos

A-Tach Mounts 50131 Instructions preview
50131
Brand: A-Tach Mounts Pages: 2
AA Products KX405 Instruction Manual preview
KX405
Brand: AA Products Pages: 8
Vaisala MD30 Setup Manual preview
MD30
Brand: Vaisala Pages: 24
Subaru SPLASH GUARD Installation Manual preview
SPLASH GUARD
Brand: Subaru Pages: 3
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
Whipple TOMAHAWK V1 Instruction Manual preview
TOMAHAWK V1
Brand: Whipple Pages: 3
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
Safe Fleet PRIME DESIGN VRR-NV200 Manual preview
PRIME DESIGN VRR-NV200
Brand: Safe Fleet Pages: 12
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
BMW E46/2 Coupe Manual preview
E46/2 Coupe
Brand: BMW Pages: 55
Whispbar K496W Fitting Instructions Manual preview
K496W
Brand: Whispbar Pages: 15
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Motoalliance Denali MA11705 Manual preview
Denali MA11705
Brand: Motoalliance Pages: 5
Cadillac GMC Yukon Denali 2005 Owner'S Manual preview
GMC Yukon Denali 2005
Brand: Cadillac Pages: 456
Saab 900 5 Speed Technical Training Manual preview
900 5 Speed
Brand: Saab Pages: 63
R&G LP0291BK Fitting Instructions Manual preview
LP0291BK
Brand: R&G Pages: 20
Whispbar S17W Fitting Instructions Manual preview
S17W
Brand: Whispbar Pages: 70
Mitsubishi MOTORS PAJERO SPORT Manual preview
PAJERO SPORT
Brand: Mitsubishi MOTORS Pages: 416

Brands by name

Popular brands

Load more brands