FEATURES OF YOUR HYUNDAI
1-19
YB110C1-A
SRS (Airbag) SERVICE
REMINDER INDICATOR
(Not all models)
The SRS service reminder indicator (SRI) comes
on and flashes for about 6 seconds after the
ignition key is turned to the “ON” position or
after the engine is started, after which it will go
out.
This light also comes on when the SRS is not
working properly.
If the SRI does not come on, or continuously
remains on after flashing for about 6 seconds
when you turned the ignition key to the “ON”
position or started the engine, or if it comes on
while driving, have the SRS inspected by an
authorized Hyundai Dealer.
ZB110P2-E
LOW FUEL LEVEL WARNING
LIGHT
The low fuel level warning light comes on when
the fuel tank is approaching empty. When it
comes on, you should add fuel as soon as
possible. Driving with the fuel level warning light
on or with the fuel level below "E" can cause the
engine to misfire.
ZB110R1-E
BRAKE PAD WEAR WARNING SOUND
When the brake pads of the front brakes be-
come worn to almost the limit of use, a
metalfriction squealing sound will be heard as a
warning to the driver that the brakes should be
checked. When this sound is heard, replace the
brake pads with new ones.
ZB110Q2-A
MALFUNCTION INDICATOR
LIGHT
This light illuminates when there is a malfunc-
tion of an exhaust gas related component, and
the system is not functioning properly so that
B260L01A-GAT
DOOR AJAR WARNING LIGHT
The door ajar warning light warns you that a
door is not completely closed.
ZB110M2-E
CHARGING WARNING LIGHT
This red warning light indicates malfunctioning
of the alternator and electrical charging system.
If this warning light glows when the ignition
switch is in the "ON" position (engine off), the
bulb and electrical wiring are satisfactory. The
light should go out when the engine is started.
If the light glows when the engine is running, the
alternator and electrical system should be
checked as soon as possible.
Warning Light Operation
The parking brake/brake fluid level warning
light should come on when the parking brake is
applied and the ignition switch is turned to "ON"
or "START". After the engine is started, the light
should go out when the parking brake is re-
leased.
If the parking brake is not applied, the warning
light should come on when the ignition switch is
turned to "ON" or "START", then go out when
the engine starts. If the light comes on at any
other time, you should slow the vehicle and
bring it to a complete stop in a safe location off
the roadway.
The brake warning light indicates that the brake
fluid level in the brake master cylinder is low
and hydraulic brake fluid conforming to DOT 3
or DOT 4 specifications should be added. After
adding fluid, if no other trouble is found, the car
should be immediately and carefully driven
to a Hyundai dealer for inspection. If further
trouble is experienced, the vehicle should not
be driven at all but taken to a dealer by a
professional towing service or some other safe
method.
Your Hyundai is equipped with dual-diagonal
braking systems. This means you still have
braking on two wheels even if one of the dual
systems should fail. With only one of the dual
systems working, more than normal pedal trav-
el and greater pedal pressure are required to
stop the car. Also, the car will not stop in as
short a distance with only half of the brake
system working. If the brakes fail while you are
driving, shift to a lower gear for additional en-
gine braking and stop the car as soon as it is
safe to do so.
