manualshive.com logo in svg

Hyundai Atos, Owner'S Manual

The Hyundai Atos Owner's Manual is an essential guide for all Atos owners. This comprehensive manual provides detailed instructions and information on maintenance, troubleshooting, and operating your vehicle. Download it for free at manualshive.com, ensuring you have the necessary knowledge to get the most out of your Hyundai Atos.

Share
Download
background image

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

  6-3

G030C01A-AAT

To Check the Oil Level

To Check the Oil Level

To Check the Oil Level

To Check the Oil Level

To Check the Oil Level

G030D01A-GAT

Adding Oil

Adding Oil

Adding Oil

Adding Oil

Adding Oil

AS60050A

L

F

Before checking the oil, warm up the engine to
the normal operating temperature and be sure
your car is parked on level ground. Turn the
engine off.

Wait a minute, then remove the dipstick, wipe it
off, fully reinsert the dipstick and withdraw it
again. Then note the highest level the oil has
reached on the dipstick. It should be between
the upper ("FULL") and lower ("LOW") range.

If the oil level is close to or below the "L" mark,
add oil until it reaches the "F" mark. To add oil:

1. Remove the oil filler cap by turning it counter-

clockwise.

2. Add oil, then check the level again. Do not

overfill.

3. Replace the cap by turning it clockwise.

The distance between the "F" and "L" marks is
equal to about 1 liter of oil.

G350A01A-GAT

ENGINE OIL CONSUMPTION

ENGINE OIL CONSUMPTION

ENGINE OIL CONSUMPTION

ENGINE OIL CONSUMPTION

ENGINE OIL CONSUMPTION
Function of Engine Oil

Function of Engine Oil

Function of Engine Oil

Function of Engine Oil

Function of Engine Oil

Engine oil has the primary function of lubricat-
ing and cooling the inside of the engine.

Engine oil consumption

Engine oil consumption

Engine oil consumption

Engine oil consumption

Engine oil consumption

It is normal that an engine should consume
some engine oil while normal driving. The cause
of oil consumption in a normal engine are as
follows;

o Engine oil is used to lubricate pistons, piston

rings and cylinders.
A thin film of oil is left on the cylinder wall
when a piston moves downwards in the
cylinder. High negative pressure generated
during engine operation sucks some of the
oil into the combustion chamber.
This oil with some oil of the cylinder wall is
burned by the high temperature combustion
gases during the combustion process.

o The engine oil consumption is strongly ef-

fected by the viscosity and quality of oil,
engine rpm and driving condition etc. The
engine oil is more consumed under severe
driving conditions such as high speeds and
frequent acceleration and deceleration than
normal driving condition.

G030D01A

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments

Related manuals for Atos

Code 3 21 COVERT Series Installation And Operation Instructions Manual preview
21 COVERT Series
Brand: Code 3 Pages: 16
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
FormFit HD 10L07 Installation Instructions preview
HD 10L07
Brand: FormFit Pages: 2
Mobile Create MCM3 Instruction Manual preview
MCM3
Brand: Mobile Create Pages: 15
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Menabo DELTA DL FIX 209FP Fitting Instructions Manual preview
DELTA DL FIX 209FP
Brand: Menabo Pages: 8
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
v.link VL2-MBN2 Manual preview
VL2-MBN2
Brand: v.link Pages: 12
Ford ALCON 1968 Owner'S Manual preview
ALCON 1968
Brand: Ford Pages: 52
Honda 2009 S2000 Owner'S Manual preview
2009 S2000
Brand: Honda Pages: 268
Ford TRANSIT CUSTOM Quick Reference Manual preview
TRANSIT CUSTOM
Brand: Ford Pages: 15
Honda 08L04-SZA-100 Installation Instructions preview
08L04-SZA-100
Brand: Honda Pages: 3
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
Honda 08P00-T7S-600 Installation Instructions preview
08P00-T7S-600
Brand: Honda Pages: 5
A-Tach Mounts 50321 Quick Start Manual preview
50321
Brand: A-Tach Mounts Pages: 2
Thule 2087 Parts List preview
2087
Brand: Thule Pages: 1
Quadratec 12057.0102 Installation Manual preview
12057.0102
Brand: Quadratec Pages: 8
Axxess OESWC-7552-STK Installation Instructions Manual preview
OESWC-7552-STK
Brand: Axxess Pages: 8

Brands by name

Popular brands

Load more brands