manualshive.com logo in svg

Hyundai Atos, Owner'S Manual

The Hyundai Atos Owner's Manual is an essential guide for all Atos owners. This comprehensive manual provides detailed instructions and information on maintenance, troubleshooting, and operating your vehicle. Download it for free at manualshive.com, ensuring you have the necessary knowledge to get the most out of your Hyundai Atos.

Share
Download
background image

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

1- 52

B850A01F-AAT

CARE OF DISC
Proper Handling

YL11240B

YL11250B

Handle your disc as shown. Do not drop the disc.
Hold the disc so you will not leave fingerprints on
the surface. If the surface is scratched,
it may cause the pickup to skip signal tracks. Do
not affix tape, paper, or gummed labels on the
disc. Do not write on the disc.

Damaged Disc

Do not attempt to play damaged, warped or
cracked discs. These could severely damage
the playback mechanism.

Storage

When not in use, place your discs in their indi-
vidual case and store them in a cool place away
from the sun, heat, and dust.

Do not grip or pull out the disc with your hand
while the disc is being pulled into the unit by the
self loading mechanism.
Do not pull the unit from the dash immediately
after a disc is inserted or the eject switch has
been pressed. If the unit is pulled out before an
operation is completed, the disc will be unstable
in the unit and may be damaged. Do not attempt
to insert a disc into the unit when the unit is out of
the dash or the power is off.

Keep Your Discs Clean

Fingerprints, dust, or soil on the surface of a disc
could cause the pickup to skip signal tracks.
Wipe the surface clean with a clean soft cloth. If
the surface is heavily soiled, dampen a clean soft
cloth in a solution of mild neutral detergent to wipe
it clean. See drawing.

B860A01A-AAT

CARE OF CASSETTE TAPES

SSAR040B

Proper care of your cassette tapes will extend
the tape life and increase your listening enjoy-
ment. Always protect your tapes and cassette
cases from direct sunlight, severely cold and
dusty conditions. When not in use, cassettes
should always be stored in the original protective
cassette case. When the vehicle is very hot or
cold, allow the interior temperature to become
more comfortable before listening to your cas-
settes.

o Never leave a cassette inserted in the player

when not being played. This could damage
the tape player unit and the cassette tape.

o We strongly recommend against the use of

tapes longer than C-60 (60 minutes total).
Tapes such as C-120 or C-180 are very thin
and do not perform as well in the automotive
environment.

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments

Related manuals for Atos

Toyota YARIS LIFTBACK 2009 Quick Reference Manual preview
YARIS LIFTBACK 2009
Brand: Toyota Pages: 13
Westfalia 316 145 Manual preview
316 145
Brand: Westfalia Pages: 71
Mazda 2 2016 Owner'S Manual preview
2 2016
Brand: Mazda Pages: 720
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
Qeedon Higlow Series Product Instruction preview
Higlow Series
Brand: Qeedon Pages: 2
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
Volvo 1989 780 Owner'S Manual preview
1989 780
Brand: Volvo Pages: 123
rough country RCH5100 Installation Instructions preview
RCH5100
Brand: rough country Pages: 4
Volvo S40 2001 Owner'S Manual preview
S40 2001
Brand: Volvo Pages: 197
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
Kuda-Phonebase 284380 Installation Instruction preview
284380
Brand: Kuda-Phonebase Pages: 3
CITROEN 2 CV4 Owner'S Manual preview
2 CV4
Brand: CITROEN Pages: 86
EZ-ON 100SMU Quick Start Manual preview
100SMU
Brand: EZ-ON Pages: 2
FEATHERLITE TRAILERS COACH TRAILERS Owner'S Manual preview
COACH TRAILERS
Brand: FEATHERLITE TRAILERS Pages: 60
Alu-Cab SH-BKT-RC-TY Fitment Instructions preview
SH-BKT-RC-TY
Brand: Alu-Cab Pages: 6

Brands by name

Popular brands

Load more brands