manualshive.com logo in svg

Hyundai Atos, Owner'S Manual

The Hyundai Atos Owner's Manual is an essential guide for all Atos owners. This comprehensive manual provides detailed instructions and information on maintenance, troubleshooting, and operating your vehicle. Download it for free at manualshive.com, ensuring you have the necessary knowledge to get the most out of your Hyundai Atos.

Share
Download
background image

DO-IT-YOURSELF MAINTENANCE

  6-17

WARNING:

The halogen bulb contains gas under pres-
sure and if impacted could shatter, and re-
sulting in flying fragments. Always wear eye
protection when servicing the bulb. Protect
the bulb against abrasions or scratches and
against liquids when lighted. Turn on the
bulb only when installing in a headlight.
Replace the headlight if damaged or cracked.
Keep the bulb out of the reach of children
and dispose of the used bulb with care.

G290A01X-EAT

HEADLIGHT AIMING ADJUSTMENT

G290A01V

Before performing aiming adjustment, make sure
of the following.

Vertical
aiming

1. Keep all tires inflated to the correct pres-

sure.

2. Place the vehicle on level ground and press

the front bumper & rear bumper down sev-
eral times.

3. See that the vehicle is unloaded (except for

full levels of coolant, engine oil and fuel, and
spare tire, jack, and tools). Have the driver
or equivalent weight placed in driver's seat.

4. Clean the head lights lens and turn on the

headlight (Low beam).

5. Open the bonnet.
6. Draw the vertical line (through the center of

each headlight) and the horizontal line
(through the centre of each headlight) on the
aiming screen.
1) Horizontal line dimension from ground:

25.43 in. (646 mm)

2) Distance between each vertical line:

38.89 in. (988 mm)
And then, draw the parallel line at 1.18 in.
(30 mm) place under the horizontal line.

7. Adjust each cut-off line of the low beam to

the parallel line with a phillips screwdriver -
VERTICAL AIMING

8. Adjust each cut-off line of the low beam to

the each vertical line with a phillips screw-
driver - HORIZONTAL AIMING.

G290B01X-EAT

Adjustment After Headlight Assembly
Replacement

If the vehicle has had front body repair and the
headlight assembly has been replaced, the
headlight aiming should be checked using the
aiming screen as shown in the illustration. Turn
on the headlight switch. (Low Beam Position)

1. Adjust headlights so that main axis of light is

parallel to centre line of the body and is
aligned with point "P" shown in the illustra-
tion.

2. Dotted lines in the illustration show centre of

headlights.

G290B01S-DAG

Horizontal line

Vertical
line

W

0.59 in.

"P"

1.18 in.

Cut-off line

Ground line

H

H

L

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments

Related manuals for Atos

PAC RadioPRO 5 RP5-GM41 Quick Start Manual preview
RadioPRO 5 RP5-GM41
Brand: PAC Pages: 3
FormFit HD 10L07 Installation Instructions preview
HD 10L07
Brand: FormFit Pages: 2
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
SuperATV Roof Installation Instructions Manual preview
Roof
Brand: SuperATV Pages: 7
Westfalia 305 158 Mounting Instructions preview
305 158
Brand: Westfalia Pages: 10
Volvo 2006 XC70 Owner'S Manual preview
2006 XC70
Brand: Volvo Pages: 211
Omix-Ada 11704.05 Owner'S Manual preview
11704.05
Brand: Omix-Ada Pages: 6
Radical Sportscars SR 3 SL Owner'S Handbook Manual preview
SR 3 SL
Brand: Radical Sportscars Pages: 44
Enduro EM203 User Manual preview
EM203
Brand: Enduro Pages: 52
Lexus LS 460 2011 Owner'S Manual preview
LS 460 2011
Brand: Lexus Pages: 830
PMT AS7.M100.001 User Manual preview
AS7.M100.001
Brand: PMT Pages: 16
Gentex Full Display Mirror Installation Instructions Manual preview
Full Display Mirror
Brand: Gentex Pages: 18
Waeco MagicWatch MWE150 Installation And Operating Manual preview
MagicWatch MWE150
Brand: Waeco Pages: 176
Ford B-MAX Quick Reference Manual preview
B-MAX
Brand: Ford Pages: 17
Falcon FN-WCCS-W User Manual preview
FN-WCCS-W
Brand: Falcon Pages: 36
SAN HIMA SH-TENT-GRAY-AHT125 User Manual preview
SH-TENT-GRAY-AHT125
Brand: SAN HIMA Pages: 11
dji C4S90-4 User Manual preview
C4S90-4
Brand: dji Pages: 3
Honda 2011 odyssey EX-L Manual preview
2011 odyssey EX-L
Brand: Honda Pages: 722

Brands by name

Popular brands

Load more brands