manualshive.com logo in svg

Hyundai Atos, Owner'S Manual

The Hyundai Atos Owner's Manual is an essential guide for all Atos owners. This comprehensive manual provides detailed instructions and information on maintenance, troubleshooting, and operating your vehicle. Download it for free at manualshive.com, ensuring you have the necessary knowledge to get the most out of your Hyundai Atos.

Share
Download
background image

FEATURES OF YOUR HYUNDAI

  1-27

sengers to sit on the cargo area while the
car is moving as this is not a proper seating
position and no seat belts are available for
use when the seat back is folded down. This
could result in serious injury or death in
case of an accident or a sudden stop. Ob-
jects should not extend higher than the top
of the front seats. This could allow cargo to
slide forward and cause injury or damage
during sudden stops.

For greater convenience, the entire seatback
and seat cushion may be folded down and up.

o To unlock the seatback, pull up on the

seatback locking knob, then pull forward on
the seatback.

o After being folded down rear seat back, fold-

up the seat cushion.

B110A03X

B110A01X-GAT

FOLDING REAR SEATBACK AND SEAT
CUSHION

B110A01X

WARNING:

The purpose of the fold-down rear seat back
and the fold-up rear seat cushion is to allow
you to carry more objects than could  other-
wise be accommodated. Do not allow pas-

B110A02X

B550A01S-DAT

HIGH-MOUNTED REAR STOPLIGHT

In addition to the lower-mounted rear stoplights
on either side of the car, the high mounted rear
stoplight in the centre of the rear window or
installed in the rear spoiler also comes on when
the brakes are applied.

B550A01V.DAG

<AMICA>

B550A01X.DAG

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments

Related manuals for Atos

ZAPTEC Go Quick Manual preview
Go
Brand: ZAPTEC Pages: 64
ZAPTEC Go Installation Manual preview
Go
Brand: ZAPTEC Pages: 24
Eclipse AVN 2210p mkII Operation Manual preview
AVN 2210p mkII
Brand: Eclipse Pages: 6
Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Brand: Porsche Pages: 144
iDataLink BLADE-AL(TB)-TL2 Install Manual preview
BLADE-AL(TB)-TL2
Brand: iDataLink Pages: 9
Magneti Marelli BCF184 Installation Instructions preview
BCF184
Brand: Magneti Marelli Pages: 2
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
Toyota Avalon 2001 Operating Manual preview
Avalon 2001
Brand: Toyota Pages: 295
Ford Fusion 2019 Supplement Manual preview
Fusion 2019
Brand: Ford Pages: 51
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Brand: iQOS Pages: 4
Volvo XC70 - ANNEXE 808 Quick Manual preview
XC70 - ANNEXE 808
Brand: Volvo Pages: 8
Scosche VQ2M Manual preview
VQ2M
Brand: Scosche Pages: 32
Oldsmobile ALERO 2001 Owner'S Manual preview
ALERO 2001
Brand: Oldsmobile Pages: 340
Valeo MBHL Operating Manual preview
MBHL
Brand: Valeo Pages: 29

Brands by name

Popular brands

Load more brands