manualshive.com logo in svg

Hyundai Atos, Owner'S Manual

The Hyundai Atos Owner's Manual is an essential guide for all Atos owners. This comprehensive manual provides detailed instructions and information on maintenance, troubleshooting, and operating your vehicle. Download it for free at manualshive.com, ensuring you have the necessary knowledge to get the most out of your Hyundai Atos.

Share
Download
background image

FEATURES OF YOUR HYUNDAI

1-36

To use the heating/ventilation system to defrost
or defog the windshield:

o Set the air intake control to the     position.
o Set the air flow control to the    position.
o Set the temperature control to a comfortably

warm position.

o Set the fan speed control to position 3 or 4.
o If vehicle is so equipped, push on the A/C for

increased defogging action.

NOTE:

In high  humidity areas the A/C can be used
with the air intake in the   position for
increased defogging action.

B730A01A-AAT

OPERATION TIPS

o To keep dust or unpleasant fumes from

entering the car through the ventilation sys-
tem, temporarily set the air intake control at
the       position. Be sure to return the control
to the    position when the irritation has
passed to keep fresh air in the vehicle. This
will help keep the driver alert and comfort-
able.

o Air for the heating/cooling system is drawn

in through the grilles just ahead of the wind-
shield. Care should be taken that these are
not blocked by leaves, snow, ice or other
obstructions.

B740A01X-GAT

AIR CONDITIONING SWITCH
(Not all models)

B740A02X-DAG

The air conditioning is turned on by pushing the
A/C button in the fan control rotary switch.

B710C02X-DAG

B710C01X-EAT

Side Ventilator

B720A02X-DAG

B720A02X-GAT

DEFROSTING/DEFOGGING

The side ventilators are located on each side of
the dashboard.
To change the direction of the air flow, move the
knob in the centre of vent up-and-down and
side-to-side.

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments

Related manuals for Atos

Hama Cup holder Operating Instruction preview
Cup holder
Brand: Hama Pages: 2
Abarth 124 SPIDER Service And Warranty Handbook preview
124 SPIDER
Brand: Abarth Pages: 36
Xblitz G250 User Manual preview
G250
Brand: Xblitz Pages: 16
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Brand: Kia Pages: 419
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
K&M MILSCO KIT# C746700 Installation Manual preview
MILSCO KIT# C746700
Brand: K&M Pages: 2
Car-Interface CI-RL4-NAC12 Manual preview
CI-RL4-NAC12
Brand: Car-Interface Pages: 25
Thule 2 Bike Carrier 977 Instructions Manual preview
2 Bike Carrier 977
Brand: Thule Pages: 6
AA Products SR-A260 Instruction Manual preview
SR-A260
Brand: AA Products Pages: 4
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
Safe Fleet PRIME DESIGN VRR3-FT21G-ST Manual preview
PRIME DESIGN VRR3-FT21G-ST
Brand: Safe Fleet Pages: 12
RAM 2013 2500 Big Horn Information preview
2013 2500 Big Horn
Brand: RAM Pages: 12
Buick 1988 Riviera Owner'S Manual preview
1988 Riviera
Brand: Buick Pages: 161
Connects2 CTUPO01 Quick Start Manual preview
CTUPO01
Brand: Connects2 Pages: 8
wtw spectroFlex Car Adapter Operating Manual preview
spectroFlex Car Adapter
Brand: wtw Pages: 4
Mazda Auto-Dimming Mirror User Manual preview
Auto-Dimming Mirror
Brand: Mazda Pages: 2
LedGlow Advanced Million Color Installation Instructions preview
Advanced Million Color
Brand: LedGlow Pages: 4

Brands by name

Popular brands

Load more brands