manualshive.com logo in svg

Hyundai Atos, Owner'S Manual

The Hyundai Atos Owner's Manual is an essential guide for all Atos owners. This comprehensive manual provides detailed instructions and information on maintenance, troubleshooting, and operating your vehicle. Download it for free at manualshive.com, ensuring you have the necessary knowledge to get the most out of your Hyundai Atos.

Share
Download
background image

FEATURES OF YOUR HYUNDAI

  1-5

B080A01A-AAT

ADJUSTABLE FRONT SEATS
WARNING:

Never attempt to adjust the seat while the
vehicle is moving. This could result in loss
of control, and an accident causing death,
serious injury, or property damage.

B080B01A-AAT

Adjusting Seat Forward and Rearward

B080C01A-AAT

Adjusting Seatback Angle

XV10110E

To move the seat toward the front or rear, pull
the lock release lever upward. This releases
the seat on its track so you can move it forward
or rearward to the desired position. When you
find the position you want, release the lever and
slide the seat forward or rearward on its track
until it locks into position and cannot be moved
further.

XV10120E

To recline the seatback, lean forward to take
your weight off it, then pull up on the recliner
control lever at the outside edge of the seat.
Now lean back until the desired seatback angle
is achieved. To lock the seatback into position,
release the recliner control lever.

WARNING:

To minimize risk of personal injury in the
event of a collision or sudden stop, both the
driver and passenger seatbacks should al-
ways be in a nearly upright position while
the vehicle is in motion. The protection pro-
vided by the seat belts and airbags may be
reduced significantly when the seatback is
reclined. There is greater risk that the driver
and passenger will slide under the seat belt
resulting in serious injury when the seatback
is reclined.

B080D01A

Lock Knob

B080D02A-AAT

Adjustable Headrestraint
(Not all models)

Headrestraint are designed to help reduce the
risk of neck injuries.
To raise the headrest, pull it up. To lower it,
push it down while pressing the lock knob.

WARNING:

o For maximum effectiveness in case of an

accident the headrestraint should be ad-
justed so the top of the headrestraint is
at the same height as the top of the
occupant's ears. For this reason, the use
of a cushion that holds the body away
from the seatback is not recommended.

o Do not operate vehicle with the

headrestraint removed as severe injury
to an occupant may occur in the event of
an accident. Headrests may provide pro-
tection against neck injuries when prop-
erly adjusted.

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments

Related manuals for Atos

iDataLink BLADE-AL(TB)-TL2 Install Manual preview
BLADE-AL(TB)-TL2
Brand: iDataLink Pages: 9
Magneti Marelli BCF184 Installation Instructions preview
BCF184
Brand: Magneti Marelli Pages: 2
Mazda 2007 MazdaSpeed6 Specification preview
2007 MazdaSpeed6
Brand: Mazda Pages: 12
Gatorback Mudflaps GCR53F Mounting Diagram & Instructions preview
GCR53F
Brand: Gatorback Mudflaps Pages: 4
HAUL MASTER 41782 Assembly And Operating Instructions Manual preview
41782
Brand: HAUL MASTER Pages: 8
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9
EUFAB 11512 Manual preview
11512
Brand: EUFAB Pages: 4
Acura TSX 2014 Advanced Technology Manual preview
TSX 2014
Brand: Acura Pages: 19
Ford 2009 Edge Owner'S Manual preview
2009 Edge
Brand: Ford Pages: 325
Ecco Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600 Manual preview
Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600
Brand: Ecco Pages: 2
JAC HFC7151M1V-U221B Workshop Manual preview
HFC7151M1V-U221B
Brand: JAC Pages: 106
Hamron 012463 Operating Instructions Manual preview
012463
Brand: Hamron Pages: 6
Ratio Electric HOME BOX SMART Manual preview
HOME BOX SMART
Brand: Ratio Electric Pages: 16
Nedap LEGIC Booster Installation Manual preview
LEGIC Booster
Brand: Nedap Pages: 18
Comtronics 246559 Installation Instructions Manual preview
246559
Brand: Comtronics Pages: 18
Improved Racing EFR-600-TX Quick Start Manual preview
EFR-600-TX
Brand: Improved Racing Pages: 11
Toyota IHF1700 Owner'S Manual preview
IHF1700
Brand: Toyota Pages: 176
Whelen Engineering Company TIR3 Super-LED/M4 Installation Manual preview
TIR3 Super-LED/M4
Brand: Whelen Engineering Company Pages: 2

Brands by name

Popular brands

Load more brands