manualshive.com logo in svg

Hyundai Atos, Owner'S Manual

The Hyundai Atos Owner's Manual is an essential guide for all Atos owners. This comprehensive manual provides detailed instructions and information on maintenance, troubleshooting, and operating your vehicle. Download it for free at manualshive.com, ensuring you have the necessary knowledge to get the most out of your Hyundai Atos.

Share
Download
background image

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

  1- 3

B880C02A-GAT

Key Numbers

AX10030A-1

The vehicle key number is recorded upon a
metal tag attached to the keys when the vehicle
is first delivered to you.
The key number should be recorded and kept in
a safe place in case the need to order further
keys arises. New keys are available from any
Hyundai dealer by quoting the relevant key num-
ber.
In the interest of security, the metal tag attached
to the keys which bears the key number should
be removed from the key ring after you receive
your new vehicle. In addition, key numbers can-
not be provided by Hyundai for security reasons.
If you need additional keys or if you should lose
your keys, your authorized Hyundai dealer can
make new keys.

B880D02A-GAT

Limp home procedures

B880D01X

In case the immobilizer warning indicator blinks
for five seconds when the ignition key is turned to
"ON" position, this indicates that the immobilizer
system is out of order. And you cannot start the
engine without the limp home procedures with
ignition key.
The following procedure is how to start the en-
gine with the function of the limp home. (0, 1, 2,
3 as a sample password).

NOTE:

You can get the limp home password when
the vehicle is first delivered to you. If you do
not have the password, consult your autho-
rized Hyundai dealer.

1. To set the password you may turn the ignition

key "ON" and then turn it "OFF" according to
the digit numbers, then the immobilizer indi-
cator will blink along with the operation of the
ignition key. For example, turn the ignition key
once for digit number "1", and twice for "2",
and so on. However, for the digit number "0",
you must turn the ignition key for 10 times.

2. Wait for 3~10 seconds.
3. You may set the remaining number of digits

by following the same procedures 1 and 2.

4. If all of four digits have been tried success-

fully, turn the ignition key "ON" and check that
the immobilizer indicator illuminates. From
this time, you have to start your engine within
30 seconds. If you start your engine after 30
seconds, your engine will not start.

NOTE:

If the engine dies while driving after limp
home procedure, you can start your engine
within 8 seconds without limp home proce-
dure again.

5. If the immobilizer indicator blinks for five

seconds, you have to try the limp home
procedure again from the beginning.

After doing the limp home procedure, you have to
consult with your authorized Hyundai dealer as
soon as possible.

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments

Related manuals for Atos

RAM 2500 2020 Quick Reference Manual preview
2500 2020
Brand: RAM Pages: 20
RAM Ram 3500 2012 User Manual preview
Ram 3500 2012
Brand: RAM Pages: 116
kincrome K12071 Owner'S Assemble And Operating Manual preview
K12071
Brand: kincrome Pages: 6
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
Ford 2004 Freestar Workshop Manual preview
2004 Freestar
Brand: Ford Pages: 8
Intec CVD500LCD Installation And Operation Manual preview
CVD500LCD
Brand: Intec Pages: 16
Buick 2015 LaCrosse Getting To Know Manual preview
2015 LaCrosse
Brand: Buick Pages: 20
Brodit ProClip 854208 Manual preview
ProClip 854208
Brand: Brodit Pages: 2
Oypla Leisure 4269 User Manual preview
4269
Brand: Oypla Leisure Pages: 4
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
JSPORT JSRLP024 Installation Instructions preview
JSRLP024
Brand: JSPORT Pages: 2
Safe Fleet PRIME DESIGN HRR3-E-PM42 Manual preview
PRIME DESIGN HRR3-E-PM42
Brand: Safe Fleet Pages: 12
N.R. AUTOSEATS Top User Manual preview
Top
Brand: N.R. AUTOSEATS Pages: 8
RAM Cargo Van 2014 Owner'S Manual preview
Cargo Van 2014
Brand: RAM Pages: 666

Brands by name

Popular brands

Load more brands