manualshive.com logo in svg

Hyundai Atos, Owner'S Manual, Page: 37 / 249

Share
Download
Hyundai Atos Owner'S Manual Download Page 37

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

FEATURES OF YOUR HYUNDAI

1- 28

B550A01F

B550A01V

<PRIME>

B550A01S-GAT

HIGH-MOUNTED REAR STOP LIGHT
(If Installed)

In addition to the lower-mounted rear stoplights
on either side of the car, the high mounted rear
stoplight in the center of the rear window or
installed in the rear spoiler also lights when the
brakes are applied.

Always engage the parking brake before leaving
the car. This also turns on the parking brake
indicator light when the key is in the "ON" or
"START" position. Before driving away, be sure
that the parking brake is fully released and the
indicator light is off.

o To engage the parking brake, pull the lever up

as far as possible.

o To release the parking brake, pull up the lever

and press the thumb button. Then, while
holding the button in, lower the brake lever.

B530A01A-AAT

PARKING BRAKE

B530A01A

B520A01A-AAT

DAY/NIGHT INSIDE REARVIEW MIR-
ROR

Your Hyundai is equipped with a day/night inside
rearview mirror. The "night" position is selected
by flipping the tab at the bottom of the mirror
toward you. In the "night" position, the glare of
headlights of cars behind you is reduced.

The outside rear view mirrors can be folded
rearward for parking in narrow areas.

WARNING:

Do not adjust or fold the outside rearview
mirrors while the vehicle is moving. This
could result in loss of control, and an acci-
dent which could cause death, serious inju-
ry or property damage.

B520A01A

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments