manualshive.com logo in svg

Hyundai Atos, Owner'S Manual

The Hyundai Atos Owner's Manual is an essential guide for all Atos owners. This comprehensive manual provides detailed instructions and information on maintenance, troubleshooting, and operating your vehicle. Download it for free at manualshive.com, ensuring you have the necessary knowledge to get the most out of your Hyundai Atos.

Share
Download
background image

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

  6-5

G050A01A-AAT

CHECKING AND CHANGING THE EN-

CHECKING AND CHANGING THE EN-

CHECKING AND CHANGING THE EN-

CHECKING AND CHANGING THE EN-

CHECKING AND CHANGING THE EN-
GINE COOLANT

GINE COOLANT

GINE COOLANT

GINE COOLANT

GINE COOLANT

WARNING:

WARNING:

WARNING:

WARNING:

WARNING:

Do not remove the radiator cap when the

Do not remove the radiator cap when the

Do not remove the radiator cap when the

Do not remove the radiator cap when the

Do not remove the radiator cap when the
engine is hot. When the engine is hot, the

engine is hot. When the engine is hot, the

engine is hot. When the engine is hot, the

engine is hot. When the engine is hot, the

engine is hot. When the engine is hot, the
engine coolant is under pressure and may

engine coolant is under pressure and may

engine coolant is under pressure and may

engine coolant is under pressure and may

engine coolant is under pressure and may
erupt through the opening if the cap is

erupt through the opening if the cap is

erupt through the opening if the cap is

erupt through the opening if the cap is

erupt through the opening if the cap is
removed. You could be seriously burned if

removed. You could be seriously burned if

removed. You could be seriously burned if

removed. You could be seriously burned if

removed. You could be seriously burned if
you do not observe this precaution. Do not

you do not observe this precaution. Do not

you do not observe this precaution. Do not

you do not observe this precaution. Do not

you do not observe this precaution. Do not
remove the  radiator cap until the radiator is

remove the  radiator cap until the radiator is

remove the  radiator cap until the radiator is

remove the  radiator cap until the radiator is

remove the  radiator cap until the radiator is
cool to the touch.

cool to the touch.

cool to the touch.

cool to the touch.

cool to the touch.

8. Before installing the new oil filter on the

engine, apply clean engine oil to the surface
of the rubber gasket.
Temporarily tighten the oil filter by hand.

G040A05X

G040A06X

9. Using the special tool (09263-02000) and

torque wrench, tighten the oil filter to the
specified torque.

Tightening torque .............. 12-16 Nm

(120-160 kg.cm, 9-12 lb.ft)

SST (09263-02000)

G040A04X

Extension bar

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

o

o

o

o

o Be careful not to drop the engine oil on

Be careful not to drop the engine oil on

Be careful not to drop the engine oil on

Be careful not to drop the engine oil on

Be careful not to drop the engine oil on
the rubber 

the rubber 

the rubber 

the rubber 

the rubber parts of the engine mounting

parts of the engine mounting

parts of the engine mounting

parts of the engine mounting

parts of the engine mounting

insulator.

insulator.

insulator.

insulator.

insulator.

o

o

o

o

o You can purchase the SST from your

You can purchase the SST from your

You can purchase the SST from your

You can purchase the SST from your

You can purchase the SST from your
Hyundai dealer.

Hyundai dealer.

Hyundai dealer.

Hyundai dealer.

Hyundai dealer.

o

o

o

o

o If you aren't sure how to use, consult

If you aren't sure how to use, consult

If you aren't sure how to use, consult

If you aren't sure how to use, consult

If you aren't sure how to use, consult
your Hyundai dealer.

your Hyundai dealer.

your Hyundai dealer.

your Hyundai dealer.

your Hyundai dealer.

10.Refill the crankcase with the recommended

engine oil. Refer to the specification in chap-
ter 9 for engine oil capacity.

11.Start the engine and check to be sure no oil

is leaking from the drain plug or oil filter.

12.Shut off the engine and recheck the oil level.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

Always dispose of used engine oil in an

Always dispose of used engine oil in an

Always dispose of used engine oil in an

Always dispose of used engine oil in an

Always dispose of used engine oil in an
environmentally acceptable 

environmentally acceptable 

environmentally acceptable 

environmentally acceptable 

environmentally acceptable manner. It is sug-

manner. It is sug-

manner. It is sug-

manner. It is sug-

manner. It is sug-

gested that it be placed in a sealed container

gested that it be placed in a sealed container

gested that it be placed in a sealed container

gested that it be placed in a sealed container

gested that it be placed in a sealed container
and taken 

and taken 

and taken 

and taken 

and taken to a service station for reclama-

to a service station for reclama-

to a service station for reclama-

to a service station for reclama-

to a service station for reclama-

tion. Do not pour the oil on the ground or

tion. Do not pour the oil on the ground or

tion. Do not pour the oil on the ground or

tion. Do not pour the oil on the ground or

tion. Do not pour the oil on the ground or
put it into the household trash.

put it into the household trash.

put it into the household trash.

put it into the household trash.

put it into the household trash.

WARNING:

WARNING:

WARNING:

WARNING:

WARNING:

Used motor oil may cause irritation or can-

Used motor oil may cause irritation or can-

Used motor oil may cause irritation or can-

Used motor oil may cause irritation or can-

Used motor oil may cause irritation or can-
cer of the skin if 

cer of the skin if 

cer of the skin if 

cer of the skin if 

cer of the skin if left in contact with the skin

left in contact with the skin

left in contact with the skin

left in contact with the skin

left in contact with the skin

for prolonged periods of time. Wash your

for prolonged periods of time. Wash your

for prolonged periods of time. Wash your

for prolonged periods of time. Wash your

for prolonged periods of time. Wash your
hands 

hands 

hands 

hands 

hands thoroughly with soap and warm wa-

thoroughly with soap and warm wa-

thoroughly with soap and warm wa-

thoroughly with soap and warm wa-

thoroughly with soap and warm wa-

ter as soon as possible after handling used

ter as soon as possible after handling used

ter as soon as possible after handling used

ter as soon as possible after handling used

ter as soon as possible after handling used
oil.

oil.

oil.

oil.

oil.

Summary of Contents for Atos


























































































































































































































































Reviews:

No comments

Related manuals for Atos

Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
Haibang HA998 Series Installation Instructions Manual preview
HA998 Series
Brand: Haibang Pages: 6
Tessera4x4 SOT-1311 ROLL Installation Manual preview
SOT-1311 ROLL
Brand: Tessera4x4 Pages: 20
Cadillac 1999 DeVille Owner'S Manual preview
1999 DeVille
Brand: Cadillac Pages: 368
Luverne 205760 Installation Instructions preview
205760
Brand: Luverne Pages: 3
Navman B2+ User Manual preview
B2+
Brand: Navman Pages: 27
RAM 1500 2WD 2021 Owner'S Manual preview
1500 2WD 2021
Brand: RAM Pages: 496
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Brand: Axxess Pages: 8
Dodge Charger 1973 Body Service Manual preview
Charger 1973
Brand: Dodge Pages: 276
Atera 080 705 User Information preview
080 705
Brand: Atera Pages: 3
Black Horse RB001BK Installation Instructions preview
RB001BK
Brand: Black Horse Pages: 5
Subaru 2003 Baja Owner'S Manual preview
2003 Baja
Brand: Subaru Pages: 32
Fab Fours C3150 Installation Instructions Manual preview
C3150
Brand: Fab Fours Pages: 21
rough country 921107830 Installation Instruction preview
921107830
Brand: rough country Pages: 4
Honda Civic Hatch 2017 Owner'S Manual preview
Civic Hatch 2017
Brand: Honda Pages: 687
Waeco MAGIC WATCH MWE-850-4XXL Installation And Operating Manual preview
MAGIC WATCH MWE-850-4XXL
Brand: Waeco Pages: 228

Brands by name

Popular brands

Load more brands