HYDAC FILTER SYSTEMS GMBH
Setting up/assembling/commissioning | 5
BeWa CTU1x3x-CTU1x4x 4093420f en-us web
47 / 124
5.3 Suctioning the machine room
The back of the extraction unit has a suction connection of
Ø 100 mm for the machine room.
For this, follow the safety data sheet of the test liquid being used.
It is advisable to suction the machine room if:
– the chemical composition of the test liquid used specifies it
– there is no ventilation and/or air conditioning in the operating
room of the CTU
– an easily volatile test liquid is used
Details on this can be found in the
of the test liq-
uid.
During the suctioning operation, note the required flow rate and
check the wiring of the entire ventilation system of the room.
Note the safety data sheet of the test liquid being used.
CAUTION
Test liquid G60 Spezial or Feroclean L261
Health hazard
u
Follow all the instructions when handling the test liquid. Details
on this can be found in the safety data sheet of the test liquid.
u
Wear your personal protective equipment. Details on this can
be found in the safety data sheet of the test liquid.
u
Make sure that there is adequate air flow in the room. Details
on this can be found in the safety data sheet of the test liquid.
1
2
3
4
5
6
7
8
9
A
Summary of Contents for CTU 1 3 Series
Page 124: ...www hydac com ...
