HYDAC FILTER SYSTEMS GMBH
Decommissioning / Disposal | 9
BeWa CTU1x3x-CTU1x4x 4093420f en-us web
109 / 124
9 Decommissioning / Disposal
In the following chapters, you will be provided with information re-
garding temporary shutdown/final decommissioning and disposal
of the product.
9.1 Temporary shutdown
If the product is being temporarily shut down, the following mea-
sures are adequate:
1. Switch the product off and disconnect it from all sources of en-
ergy.
2. Follow all the notices in the
Transport/storage
chapter
9.2 Permanent shutdown
If the product is being shut down permanently, proceed as follows:
– Empty the product fully, including all the components, before
the shutdown.
– Fully disconnect the product from the surrounding units.
– Slacken or remove the electric, pneumatic or hydraulic connec-
tions insofar as they are present.
9.3 Disposal / Recycling
Dismount and recycle the product that cannot be used any more,
not as a whole unit, but in individual parts and according to the
kind of the materials. After dismantling and separating all the parts
by sorting them correctly, dispose of the product in an environ-
mentally friendly manner.
Dispose of the dismantled individual parts / drained operating flu-
ids / fluids in an environmentally friendly manner. Follow the re-
spective national regulations.
1
2
3
4
5
6
7
8
9
A
Summary of Contents for CTU 1 3 Series
Page 124: ...www hydac com ...
