Hydac CTU 1 3 Series Operating And Maintenance Instructions Manual Download

Page: 39 / 124

HYDAC FILTER SYSTEMS GMBH

Transporting / Storing the extraction unit | 4

BeWa CTU1x3x-CTU1x4x 4093420f en-us web

39 / 124

4 Transporting / Storing the extraction

unit

Through correct handling during transportation and storage, you
will maintain the life cycle of the extraction unit.

Move the extraction unit by pulling or pushing the handle.

Fig. 10:

Moving the extraction unit

NOTICE

Lifting the extraction module by the components

The extraction unit will be damaged

Use suitable lifting accessories to lift the extraction module.

Lift the extraction module only by the housing, not by the at-
tachments or components.

In order to transport/store the extraction unit, proceed as fol-
lows:

1. Completely empty the extraction unit (all the containers,

flushing and return line filter and the lines)
Dispose of the escaping test fluid in an environmentally
friendly way.

2. Remove the compressed air supply.

Summary of Contents for CTU 1 3 Series





























































































































Search results

Summary of Contents for CTU 1 3 Series

Reviews:

Related manuals for CTU 1 3 Series

Brands by name

Popular brands

Hydac CTU 1 3 Series, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for CTU 1 3 Series

Reviews:

Related manuals for CTU 1 3 Series

Brands by name

Popular brands