4 | Transporting / Storing the extraction unit
HYDAC FILTER SYSTEMS GMBH
40 / 124
BeWa CTU1x3x-CTU1x4x 4093420f en-us web
3. Disconnect the power plug and all the electric/hydraulic con-
nections, wind up the cables/hoses and fasten them to the
extraction unit.
4. Remove all moveable, loose and components sensitive to vi-
bration e.g. the grating, spray gun, PC, monitor, keyboard,
foot switch etc. from the extraction unit.
Store the extraction unit in clean and dry rooms, in an upright posi-
tion under the storage conditions, see
4.1 Transporting with a fork lift truck
The extraction unit is shipped from the factory in a wooden box
with the appropriate securing devices. Pack the assembly for fur-
ther transportation in this wooden box. Alternatively, place the as-
sembly on a pallet of sufficient size using a fork lift truck. Brace the
extraction unit so that the guide rolls are not loaded. Secure the
extraction unit to prevent it from tipping.
Fig. 11:
Transport the extraction unit with a fork lift truck. Example of a
CTU 1xxx
1
2
3
4
5
6
7
8
9
A
Summary of Contents for CTU 1 3 Series
Page 124: ...www hydac com ...