HYDAC FILTER SYSTEMS GMBH
General | 1
BeWa CTU1x3x-CTU1x4x 4093420f en-us web
9 / 124
The document no. with the index (4) is meant for identifying and
reordering the manual. The index is incremented every time the
manual is revised or changed.
The manual contains a table of contents, a list of tables and fig-
ures, an index and a glossary.
1.2.2 Representation of requirements
These are absolutely required for carrying out a work activity on
the product and are marked with a check mark and are in bold in
the text.
An example for the representation of requirements:
ü
he product is assembled and connected.
ü
The product is switched off.
1. Switch the product on.
1.2.3 Representation of procedural instructions
In the case of procedural instructions, there are the two following
representations:
Procedural instructions with a fixed sequence
Procedural instructions, whose sequence must be complied with
without fail are listed with sequential numbering (1., 2., 3., etc.).
An example for procedural instructions with a fixed sequence:
1. Remove the transport securing device.
2. First fill the product.
3. Switch the product on.
Procedural instructions with a random sequence
Procedural instructions that have a random sequence are listed as
bullet points (-).
An example of a procedural instruction with a random sequence:
– Clean the display.
– Rinse the product.
1
2
3
4
5
6
7
8
9
A
Summary of Contents for CTU 1 3 Series
Page 124: ...www hydac com ...
