Huvitz HRK-7000 User Manual Download

Page: 5 / 97

--------------------------------------------------------Auto Ref/Keratometer HRK-7000/7000A 5

8.2.1.

Manual Measurement Mode ................................................................. 41

8.2.2.

Auto Measurement Mode ...................................................................... 44

8.3.

Corneal Curvature / Refractive Power Measurement Mode (K&R Mode) .. 45

8.3.1.

Manual Measurement Mode ................................................................. 45

8.3.2.

Auto Measurement Mode ...................................................................... 48

8.3.3.

Diverse Indications ................................................................................ 49

8.4.

Keratometry Peripheral Measurement (KER-P Mode) .................................. 50

8.5.

Measurement of Contact Lens Base Curve(CLBC Mode) ............................. 54

8.6.

Intraocular Lens (IOL) Measurement Mode (IOL Mode)................................ 56

8.7.

Retro-ILLUM Measurement Mode (Retro-ILLUM Mode) ............................... 57

8.7.1.

Adjustment of Array and Focus ............................................................. 57

8.7.2.

Observation on Retro-Illum ................................................................... 61

8.7.3.

Storage .................................................................................................. 62

8.7.4.

Examination on the other eye ............................................................... 62

8.7.5.

Call for Stored Image ............................................................................ 63

8.7.6.

Return to measurement mode .............................................................. 64

Other Modes ............................................................................................................. 65

9.1.

Acuity Map Mode (Z-MAP Mode) .................................................................. 65

9.1.1.

Composition of Window ........................................................................ 65

9.1.2.

Change of Window ................................................................................ 67

9.2.

Measurement of Corneal Radius(SIZE Mode) .............................................. 69

9.3.

VIRTUAL COMPARISON Mode .................................................................... 73

9.4.

DISPLAY Mode .............................................................................................. 75

9.5.

User SETUP Mode ........................................................................................ 76

Summary of Contents for HRK-7000


































































































Search results

Summary of Contents for HRK-7000

Reviews:

Related manuals for HRK-7000

Brands by name

Popular brands

Huvitz HRK-7000, User Manual

Search results

Summary of Contents for HRK-7000

Reviews:

Related manuals for HRK-7000

Brands by name

Popular brands