SERVICE WORK ON THE CHASSIS 12
85
H03714-10
–
Fill bleeding syringe
4
with the appropriate hydraulic fluid.
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the slave cylinder, remove the protection cap and bleeder
screw
5
and mount bleeding syringe
4
.
S04456-10
–
Now press the fluid into the system until it emerges from
hole
6
of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reser-
voir to prevent overflowing.
–
Remove the bleeding syringe. Mount and tighten the bleeder
screw. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
rim
4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
12.44
Removing the engine guard
H01655-01
–
Remove screws
1
and engine guard.
12.45
Installing the engine guard
H01655-01
–
Attach the engine guard on the frame at the rear and swing
up at the front.
–
Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
Summary of Contents for TE 250
Page 1: ...OWNER S MANUAL 2023 TE 250 TE 300 Art no 3402635en ...
Page 2: ......
