Husqvarna TE 250, Owner'S Manual

Page: 140 / 169

19 CLEANING, CARE
138
–
Treat bare metal (except for brake discs and the exhaust sys-
tem) with a corrosion inhibitor.
Preserving materials for paints, metal and rubber
( p. 157)
–
Treat all plastic parts and powder-coated parts with a mild
cleaning and care product.
Special cleaner for glossy and matte paint finishes, metal
and plastic surfaces ( p. 158)
(All EU/AR standard models)
–
Oil the steering lock.
Universal oil spray ( p. 158)
19.2 Checks and maintenance steps for winter operation
Info
If you use the motorcycle in winter, salt can be expected on the roads. You should therefore take pre-
cautions against aggressive road salt.
If the vehicle has been used on salted roads, use cold water for cleaning after riding. Warm water
enhances the corrosive effects of salt.
401060-01
–
Clean the motorcycle. ( p. 137)
–
Clean the brakes.
Info
After EVERY trip on salted roads, thoroughly clean
the brake calipers and brake linings, after they have
cooled down and without removing them, with cold
water and dry them carefully.
After riding on salted roads, thoroughly clean the vehi-
cle with cold water and dry it well.
–
Treat the engine, link fork, and all other bare or zinc-plated
parts (except the brake discs) with a wax-based corrosion
inhibitor.
Info
Corrosion inhibitor must not come in contact with the
brake discs as this would greatly reduce the braking
force.
–
Clean the chain. ( p. 76)