Version January 2019
12
EN
HÜRNER WeldControl 2.0 630 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
VLRÐ@>KÐPBIB@QÐ>ÐJBKRÐLMQFLK ÐQEBKÐ>@@BPPÐQEBÐPBIB@QBAÐPR?JBKRÐ?VÐ
pressing the MENU key again.
&KÐQEBÐ*>@EFKBÐ!>Q>ÐPR?JBKR ÐQEBÐQVMBÐLCÐJ>@EFKBÐFQPÐABPFDK>QFLKÐ
>KAÐFQPÐ@VIFKABOÐPB@QFLKÐQLÐTEF@EÐQEBÐEVAO>RIF@ Ð@LKQOLI Ð>KAÐA>Q>ÐILD
-
DFKDOBMLOQÐDBKBO>QFLKÐRKFQÐFPÐ@LKKB@QBA ÐE>PÐQLÐ?BÐABCFKBAÐPBBÐQEBÐ
arrow symbol in Display 5). This definition is preset ex works and needs
@E>KDFKDÐLKIVÐTEBK ÐBU@BMQFLK>IIV ÐQEBÐ@LKQOLIÐRKFQÐFPÐ@LKKB@QBAÐQLÐ
>ÐAFCCBOBKQÐJ>@EFKBÐ1LÐ@E>KDBÐFQ ÐPBIB@QÐQEBÐMOLMBOÐJ>@EFKBÐQVMBÐ?VÐ
pressing the
×
or
Ø
cursor keys and confirm by pressing the START/
SET key.
Important
Ð&CÐQEBÐTOLKDÐJ>@EFKBÐFPÐPBIB@QBAÐFKÐQEFPÐJBKR Ð>IIÐMOBPPROBÐ
computations that the machine makes when welding in the
4BIA LKQOLIÐ JLAB Ð TFIIÐ ?BÐ TOLKDÎÐ E>KDFKDÐ QLÐ >KLQEBOÐ
J>@EFKBÐOBNRFOBPÐ@LKPRIQ>QFLKÐTFQEÐQEBÐJ>KRC>@QROBOÐLOÐ>KÐ
>RQELOFWBAÐPBOSF@BÐPELM Ð>PÐ>ÐPBKPLOÐ@>IF?O>QFLKÐFPÐQEBKÐ>IPLÐ
OB@LJJBKABAÐ1EFPÐPQBMÐOBNRFOBPÐMOLMBOÐ>RQELOFW>QFLK
PÐ >KÐ >AAFQFLKÐ QLÐ QEBÐ MOBFKPQ>IIBAÐ J>@EFKBP Ð RPBOABCFKBAÐ J>@EFKBÐ
QVMBPÐ@>KÐ?BÐPBQÐ>PÐKBBABAÐ>QÐQEBÐRKRPBAÐJBKRÐBKQOFBPÐ>ÐABPFDK>QFLKÐ
for the machine and its cylinder section have to be entered).
1EBÐ0BKPLOÐ->O>JBQBOPÐPR?JBKR ÐRPBAÐQLÐ@>IF?O>QBÐQEBÐMOBPPROBÐ>KAÐ
QEBÐQBJMBO>QROBÐPBKPLOP ÐPELRIAÐ?BÐ>@@BPPBAÐ?VÐ>RQELOFWBAÐPQ>CCÐLKIVÐ
>KAÐFP ÐQEBOBCLOB ÐMOLQB@QBAÐ?VÐ>KLQEBOÐ>@@BPPÐ@LABÐAFP@ILPBAÐLKIVÐQLÐ
such personnel as is allowed to manage these settings.
Ð 2DSSHMFÐSGDÐ#DE@TKSÐ"NMÆFTQ@SHNMÐNEÐSGDÐ,@BGHMD
&KÐQEBÐPR?JBKRPÐLCÐQEBÐ LKCFDRO>QFLKÐ*BKR Ð>QÐe0BQQFKDP sÐQEBÐM>
-
rameters related to the welding unit itself and its operation can be
PBQÐQÐe/B@LOAFKD sÐQEBÐQO>@B>?FIFQVÐA>Q>ÐQE>QÐE>SBÐQLÐLOÐKBBAÐKLQÐ?BÐ
recorded and written into the reports can be enabled or disabled. The
desired sub-menu is selected using the
×
and
Ø
arrow keys. Then to
>@@BPPÐQE>QÐPR?JBKR ÐMOBPPÐQEBÐ*"+2ÐHBV
&KÐ?LQEÐM>OQPÐLCÐQEBÐ@LKCFDRO>QFLKÐJBKR ÐRPBÐQEBÐ
×
and
Ø
arrow keys
to select the desired set-up option. Use the
Ö
arrow key to toggle
between “on” and “off” for that set-up option.
&CÐ>Ðe*sÐFPÐPELTKÐKBUQÐQLÐ>ÐPBQRMÐLMQFLK ÐQEFPÐFKAF@>QBPÐQE>QÐ>ÐPR?
menu is accessible here by pressing the MENU key.
Important
Ð,KÐ?LQEÐJBKRÐIBSBIPÐ LKCFDRO>QFLKÐ*BKRÐ>KAÐFQPÐOBPMB@QFSBÐ
PR?JBKRP ÐMOBPPÐQEBÐ01/10"1ÐHBVÐQLÐP>SBÐQEBÐPBQQFKDPÐQLÐ
memory or press the STOP/RESET key to return to the previ-
ous menu level without saving possible changes.
4.1.2 Understanding the “Settings” Sub-menu
“Check Code Expiry on” means that the welder identification code has
to be
Ð@ROOBKQÐ>KAÐKLQÐBUMFOBAÐABC>RIQÐMBOFLAÐLCÐS>IFAFQVÐÐVB>OPÐ
COLJÐ@LABÐFPPR>K@B ÐLOÐQEBÐTBIAFKDÐLMBO>QFLKÐ@>KKLQÐ?BÐPQ>OQBA Ð
eLCC sÐQE>QÐQEBÐS>IFAFQVÐLCÐQEBÐ@LABÐ
is not checked at all.
“Memory Control on” means that when the system memory is full of
OBMLOQP ÐQEBÐRKFQÐTFIIÐ?BÐ
blocked until the reports are printed or
ALTKIL>ABA ÐeLCC sÐQE>QÐFQÐ
works but that the oldest report will
be overwritten.
“Automode on” means that in butt-welding operations the Automode
CB>QROBÐ CLOÐ QEBÐ B>PVÐ J>K>DBJBKQÐ LCÐ QEBÐ TBIAFKDÐ MOL@BPPÐ PBBÐ
Sect. 4.3.4) can
Ð?BÐRPBA ÐeLCC sÐQE>QÐQEBÐCB>QROBÐFPÐ
not available.
Settings -M-
>Reporting -M-
Sensor Parameter-M-
Machine Data -M-
Display 4
Display 5
*** SETTINGS ***
Check Code Exp. Off
Memory Control On
>Automode On
Display 6
OBJLSBAÐ1EBK ÐQLÐI>RK@E
HST 500O 14.13
>HST 630O 14.13
Summary of Contents for WeldControl 2.0 630
Page 2: ......
