Stumpfschweißsystem
Typ
WeldControl 2.0 630
Maschinennr. 14557001
Hürner Schweisstechnik
Nieder-Ohmener Str. 26
D - 35325 Mücke
CE
Tel. +49 6401 9127 0
Version January 2019
EN
7
HÜRNER WeldControl 2.0 630 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
must have participated in a dedicated training. The operating/
owning organization engages to check at reasonable intervals
if the system is operated by the welders as intended and under
proper guidelines of occupational safety.
pÐ 1EBÐPVPQBJÐJRPQÐ?BÐLMBO>QBAÐLKIVÐTEBKÐFKÐMOLMBOÐPQ>QBÐLCÐOBM>FOÐ
>KAÐCLOÐLKBÐLCÐQEBÐFKQBKABAÐRPBPÐBCLOBÐTBIAFKD ÐQEBÐTBIABOÐFPÐ
OBNRFOBAÐQLÐJ>HBÐPROBÐQE>QÐQEBÐPQ>QBÐLCÐQEBÐPVPQBJÐFPÐFKÐLOABO
Important
Ð!ROFKDÐQO>KPMLOQ ÐQEBÐC>@FKDÐQLLIÐ>KAÐQEBÐEB>QFKDÐBIBJBKQÐ
have to be placed into the provided carrying rack at all
times.
Important
The dust cap for the data tranfer interface port has to cover
QEBÐ MLOQÐ AROFKDÐ LMBO>QFLK Ð FKÐ LOABOÐ QLÐ HBBMÐ ERJFAFQVÐ >KAÐ
contaminations away.
2.5 Intended Use
The welding system is intended exclusively for joining plastic pipes
and fittings according to the butt-welding process with heating ele-
ment. See Section 3 for an overview of the welding process enabled
by this system.
The notion of intended use also includes:
pÐ LJMIF>K@BÐTFQEÐQEBÐFKPQOR@QFLKPÐFKÐQEBÐ2PBOPÐ*>KR>I
pÐ ,?PBOS>QFLKÐLCÐ>IIÐPBOSF@BÐ>KAÐJ>FKQBK>K@BÐFKQBOS>IP
Important
All uses other than those mentioned above are not allowed
and will cancel any and all liability or warranty by the manu-
facturer. Unintended use may cause considerable hazards and
material damage.
2.6 Warranty
Warranty claims may be raised only if the conditions for warranty given
in the General Terms and Conditions of Sale and Delivery obtain.
2.7 Transport and Storage
2.8 Identifying the Product
"SBOVÐMOLAR@QÐFPÐFABKQFCFBAÐ?VÐ>ÐK>JBÐMI>QBÐ&QÐPELTPÐQEBÐJLABIÐe1VMs Ð
QEBÐPBOF>IÐKRJ?BOÐe*>P@EFKBKKOs Ð>KAÐQEBÐJ>KRC>@QROBOÐ1EBÐCFOPQÐ
two digits of the serial number represent the year of manufacture.
3
Understanding the Machine
This butt-welding machine for plastics can be used both as an on-site
>KAÐ>PÐ>ÐTLOHPELMÐFKPQ>II>QFLK ÐCLOÐGLFKQFKDÐLMBO>QFLKPÐMFMBQLMFMB Ð
?RQÐ>IPLÐCLOÐMOL@BPPFKDÐQBBPÐ>KAÐBI?LTPÐPBBÐ>IPLÐQEBÐCFOPQÐM>O>DO>MEPÐLCÐ
Sect. 4.3 and 4.4 for more detailed information on this). The machine
BK>?IBPÐTBIAFKDÐ>@@LOAFKDÐQLÐQTLÐJLABP ÐQEBÐ*>KR>IÐ*LABÐ>KAÐQEB
!>Q>Ð )LDDFKD/BMLOQÐ $BKBO>QFLKÐ JLAB Ð LOÐ 4BIAÐ LKQOLIÐ *LABÐ CLOÐ
short.
4EBKÐQEBÐMOLAR@QÐFPÐQO>KPMLOQBAÐLOÐPQLOBA ÐQEBÐEVAO>RIF@ÐQR?FKDÐPELRIAÐ
not be detached or squeezed
. For transporting the pipe facing tool
>KAÐQEBÐEB>QFKDÐBIBJBKQ ÐRPBÐQEBÐMOLSFABAÐ@>OOVFKDÐO>@HÐ>QÐ>IIÐQFJBPÐ
never connect them to, or disconnect them from, the hydraulic
unit unless the hydraulic unit is switched off
.
Summary of Contents for WeldControl 2.0 630
Page 2: ......
