HURNER WeldControl 2.0 630, User Manual

Page: 39 / 79

Version January 2019
EN
15 HÜRNER WeldControl 2.0 630 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Enter Commission No.
++++++++++++++++++++
++++++++++++
Display 12
The code has to be an ISO-compliant code. It can be entered either
using the cursor keys and confirming the input by pressing the START/
0"1ÐHBV ÐLOÐ?VÐOB>AFKDÐ>Ð/#&!ÐQO>KPMLKABOÐ@>OAÐLOÐP@>KKFKDÐFQÐCOLJÐ>Ð
bar code with the optional handheld scanner.
4EBKÐQEBÐ@LABÐT>PÐMOLMBOIVÐP@>KKBAÐLOÐBKQBOBA ÐQEFPÐFPÐ@LKCFOJBAÐ?VÐ
an audible signal.
4.2.2 Entering or Changing the Commission Number
#OLJÐ!FPMI>VÐÐLOÐ>CQBOÐQEBÐTBIABOÐFABKQFCF@>QFLKÐ@LABÐT>PÐBKQBOBA ÐQEBÐ
J>@EFKBÐOBNRBPQPÐQEBÐFKMRQÐLCÐQEBÐGL?ÐKRJ?BO ÐLOÐ@LJJFPPFLKÐKRJ?BO Ð
LCÐ>ÐJ>UFJRJÐÐ@E>O>@QBOP ÐFCÐFQÐT>PÐBK>?IBAÐFKÐQEBÐ LKCFDRO>QFLKÐ
*BKRÐ&CÐ>Ð@LJJFPPFLKÐKRJ?BOÐBUFPQPÐ>IOB>AVÐFKÐJBJLOV ÐQEFPÐLKBÐFPÐ
MOLMLPBAÐ6LRÐ@>KÐBFQEBOÐ@LKCFOJÐFQÐ?VÐMOBPPFKDÐ01/10"1ÐLOÐ@E>KDBÐFQÐ
using the cursor keys or reading it with the scanner or from a RFID card
and then confirm the new number by pressing the START/SET key.
It is possible to select a previously saved commission number instead
of the one shown on the screen by pressing the
Õ
and
Ö
cursor keys
simultaneously. This causes the screen to show in which you can scroll
through the commission numbers in memory using the
Õ
and
Ö
ÐHBVP Ð
to select a number and then confirm it by the START/SET key. This
KRJ?BOÐ TFIIÐ ?BÐ RPBAÐ CLOÐ QEBÐ KBUQÐ TBIAFKDÐ 1LÐ NRFQÐ QEBÐ P@OLIIÐ JLABÐ
TFQELRQÐPBIB@QFKDÐ>Ð@LJJFPPFLK ÐMOBPPÐQEBÐ01,-/"0"1ÐHBV
4.2.3 Entering or Changing the Joint Number
#OLJÐ!FPMI>VÐÐLOÐ>CQBOÐQEBÐ@LJJFPPFLKÐKRJ?BOÐT>PÐBKQBOBA ÐQEBÐJ>
-
@EFKBÐOBNRBPQPÐQEBÐFKMRQÐLCÐQEBÐTBIAFKDÐKRJ?BO ÐLOÐGLFKQÐKRJ?BO ÐFCÐFQÐ
was enabled in the Configuration Menu.
1EBÐGLFKQÐKRJ?BO ÐLOÐTBIAFKDÐKRJ?BO ÐFPÐ?>PBAÐLKÐQEBÐGL?@LJJFPPFLKÐ
number. This means that it increments by 1 for every welding opera-
QFLKÐ MBOCLOJBAÐ FKÐ QEBÐ P@LMBÐ LCÐ QEBÐ @ROOBKQÐ @LJJFPPFLKÐ FABKQFCFBAÐ
previously by entering the appropriate job number). In the example in
!FPMI>VÐ ÐQEBÐKBUQÐTBIAFKDÐLMBO>QFLKÐTFIIÐ?BÐP>SBAÐQLÐTBIAFKDÐOBMLOQÐ
number 72 while the joint itself is joint number 2 of the current job/
commission.
Info
The first joint of a commission for which no joint has been
P>SBAÐQLÐJBJLOVÐPLÐC>O Ð>IT>VPÐOB@BFSBPÐKLÐÐ&CÐQEBÐJBJLOVÐ
>IOB>AVÐELIAPÐGLFKQPÐCLOÐ>Ð@LJJFPPFLK ÐQEBÐJ>@EFKBÐCFKAPÐQEBÐ
highest number of the joints existing for that commission
and uses this number plus 1. The user is shown the number
thus found on the screen and can apply or change it. If the
RPBOÐ@E>KDBPÐQEBÐGLFKQÐKRJ?BO ÐFQÐFPÐEFPÐOBPMLKPF?FIFQVÐQLÐJ>HBÐ
sure that no number is assigned twice in one commission. If
>ÐGLFKQÐKRJ?BOÐ>MMB>OPÐQTF@BÐFKÐ>Ð@LJJFPPFLK ÐQEFPÐTFIIÐKLQÐ
affect the welding process and the logging of its data in
>KVÐT>VÐ%LTBSBO ÐFKÐQE>QÐ@LJJFPPFLKÐQTLÐGLFKQPÐTFIIÐKLQÐ?BÐ
AFPQFKDRFPEBAÐ?VÐ>ÐRKFNRBÐKRJ?BO
Ð &CÐRPBOÐFKMRQPÐIB>SBÐPLJBÐGLFKQÐKRJ?BOPÐRKRPBAÐCLOÐFKPQ>K@B Ð
CLOÐ>ÐDFSBKÐ@LJJFPPFLKÐKLÐ Ð Ð Ð Ð Ð ÐQEBÐD>MPÐALÐKLQÐ
DBQÐCFIIBA Ð>KAÐQEBÐ>RQLJ>QF@>IIVÐCLRKAÐKRJ?BOÐMOLMLPBAÐCLOÐ
the next welding operation will still be the highest existing
KRJ?BOÐMIRPÐÐQE>QÐFP ÐÐFKÐQEFPÐBU>JMIB
The joint number can also be entered after simultaneously pressing
the cursor keys
Õ
and
Ö
when Display 3 is showing on the screen.