Version January 2019
EN
23
HÜRNER WeldControl 2.0 630 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Type of Error
Description
Overheated
The temperature of the control and hydraulic unit is too hot. Let the
welding system cool down for about 1 hour.
Pressure Sensor Defective
1EBÐPBKPLOÐFKAF@>QBAÐLKÐQEBÐAFPMI>VÐEVAO>RIF@ÐMOBPPROB ÐEB>QFKDÐ
BIBJBKQÐQBJMBO>QROB Ð>J?FBKQÐQBJMBO>QROBÐFPÐABCB@QFSBÐTEBOBÐ
MLPPF?IB Ð@EB@HÐQEBÐ@LKKB@QFLKPMIRDÐE>SBÐQEBÐJ>@EFKBÐFKPMB@QBAÐ?VÐ
an authorized service shop if needed.
Heating Sensor Defective
Temperature Sensor
Defective
Printer not Ready
LKIVÐI>?BIÐQ>DÐMOFKQBO
1EBÐLMQFLK>IÐMOFKQBOÐFPÐKLQÐOB>AVÐMLPPF?IBÐOB>PLKPÐ>IPLÐKLÐ
communication or faulty cable).
Download Cancelled
!ROFKDÐA>Q>ÐQO>KPCBOÐLOÐMOFKQFKD Ð>KÐBOOLOÐ@LKAFQFLKÐL@@ROOBAÐTEF@EÐ
could not be cleared.
Memory Full
The system memory is full of welding reports. Print or download the
reports in memory or switch memory control off. Without memory
@LKQOLI Ð>ÐKBTÐOBMLOQÐLSBOTOFQBPÐQEBÐLIABPQÐBUFPQFKDÐLKB
c. Welding Process
Temperature low
Heating element temperature will be increased automatically.
Temperature high
Heating element temperature will be reduced automatically.
Error Changeover
It took too long to retract the heating plate and bring the pipes to
joining; welding will have to be repeated.
Error Drag Pressure
Impossible to determine the drag pressure; maybe pipes will have to
?BÐ@I>JMBAÐLK@BÐ>D>FKÐLOÐQEBÐMOBPPROBÐFPÐ?BILTÐÐ?>O ÐTEF@EÐFPÐKLQÐ
feasible for technical reasons.
Error Build-up Pressure
Build-up pressure too high or too low and was not re-adjusted in
time.
Error Heat Soak Pressure
Heat-soaking pressure too high and was not re-adjusted in time.
Error Joining Pressure
Joining pressure too high or too low and was not re-adjusted in
time.
Cooling Stopped
Operator has stopped the cooling time by pressing the STOP/REST
key.
Error Plate Temperature
Heating element temperature is out of tolerance; impossible to
re-adjust the temperature; maybe the ambient temperature was too
low.
4.6 Using ViewWeld to View Welding Reports and Print Tags
The ViewWeld feature offers viewing an abstracted version of the
welding report recorded during the last welding process and print-
ing it as a label tag to be affixed to the joint on the optionally avail-
>?IBÐ Q>DÐ MOFKQBOÐ 1EBÐ 3FBT4BIAÐ >?PQO>@QÐ PELTPÐ QEBÐ OBMLOQÐ KRJ?BO Ð
the date and time of the welding and the welding parameters along
TFQEÐ>KÐBS>IR>QFLKÐLCÐQEBÐNR>IFQVÐLCÐQEBÐGLFKQTBIAFKDÐLMBO>QFLKÐPBBÐ
Display 33).
1LÐ@>IIÐQEBÐ3FBT4BIAÐ>?PQO>@QÐLCÐ>ÐTBIAFKDÐOBMLOQ ÐMOBPPÐQEBÐ
×
key in
QEBÐPQ>OQÐP@OBBKÐPBBÐ!FPMI>VÐÐ1LÐMOFKQÐ>ÐQ>DÐLCÐQEFPÐLMBO>QFLK ÐMOBPPÐ
the START/SET key in the ViewWeld screen.
CQBOÐ QEBÐ 3FBT4BIAÐ >?PQO>@QÐ T>PÐ >@@BPPBA Ð FQÐ FPÐ MLPPF?IBÐ QLÐ ?OLTPBÐ
through all abstracts in memory by pressing the
Õ
and
Ö
keys.
5
Downloading the Reports
Interface
USB A Interface Port
Ð
CLOÐ @LKKB@QFKDÐ 20Ð J>PPÐ PQLO>DBÐ JBAF>Ð PR@EÐ >PÐ >Ð JBJLOVÐ
stick)
0015 24.02.13 09:33
HST 315
No Error
Display 33
Summary of Contents for WeldControl 2.0 630
Page 2: ......
