Version January 2019
16
EN
HÜRNER WeldControl 2.0 630 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
4.2.4 Entering oder Changing Further Data on Component Traceability
&KÐQEBÐP>JBÐT>VÐ>PÐTBIABOÐFABKQFCF@>QFLKÐ@LAB Ð@LJJFPPFLKÐ>KAÐTBIA
-
FKDÐKRJ?BO ÐLQEBOÐA>Q>ÐOBI>QFKDÐQLÐQEBÐ@LJMLKBKQPÐ@>KÐ?BÐBKQBOBAÐFCÐ
QEBVÐTBOBÐBK>?IBAÐFKÐQEBÐ LKCFDRO>QFLKÐ*BKRÐ1EBVÐ>OBÐOBNRBPQBAÐFKÐ
QEBÐCLIILTFKDÐLOABOÐKLQÐ>IIÐLCÐQEBJÐFKÐ?LQEÐTBIAFKDÐMOL@BPPBPÐQE>KÐ
can be used): length of the 1
st
ÐMFMB Ð@LABÐLCÐQEBÐ
st
ÐMFMB ÐIBKDQEÐLCÐQEBÐ
2
nd
ÐMFMB Ð@LABÐLCÐQEBÐ
nd
ÐMFMB Ð@LABÐLCÐQEBÐCFQQFKD ÐTB>QEBOÐ@LKAFQFLKP Ð
>AAFQFLK>IÐA>Q>Ð>PÐABCFKBAÐ?VÐQEBÐRPBO
Info
If pipe codes for the two pipes are entered and if those pipe
codes state different sizes and/or Standard Dimension Ratios
0!/ÐCLOÐQEBÐMFMBP ÐQEBKÐ>Ð@LABÐBOOLOÐFPÐQOFDDBOBAÐPFK@BÐQEBPBÐ
welding parameters must be identical for both pipes.
All data can be entered by using the cursor keys and confirming by
pressing the START/SET key or can be scanned from a bar code or an
/#&!Ð@>OA ÐFCÐ>S>FI>?IB ÐTFQEÐQEBÐP@>KKBOÐLOÐQO>KPMLKABOÐOB>ABOÐ,KBÐ
BU@BMQFLKÐFPÐQEBÐTB>QEBOÐPBBÐ!FPMI>VÐÐ1EFPÐLMQFLKÐFPÐMOBPBKQBAÐ>PÐ
a list in which the applicable conditions can be selected by pressing
×
or
Ø
and confirmed by pressing the START/SET key.
4.3 Butt Welding in the WeldControl Mode
1EBÐTBIAFKDÐMOL@BPPÐ@>KÐ?BÐMBOCLOJBAÐCRIIVÐJ>KR>IIVÐ*>KR>IÐ*LABÐ
LOÐTFQEÐQEBÐPRMMLOQÐLCÐQEBÐEVAO>RIF@ Ð@LKQOLI Ð>KAÐA>Q>ÐILDDFKDOBMLOQÐ
DBKBO>QFLKÐRKFQÐ4BIA LKQOLIÐ*LAB ÐTEF@EÐAFPMI>VPÐ>IIÐPQBMPÐKBBABAÐ
during welding on the screen to the welder’s attention or has him
@LKCFOJÐQEBJ Ð>KAÐTEF@EÐJ>HBPÐ>ÐOBMLOQÐLCÐQEBÐTBIAFKDÐLMBO>QFLKÐ
No welding report is generated when the welding is fully manual.
BILT ÐQEFPÐ?LLHIBQÐCFOPQÐMOBPBKQPÐQEBÐTBIAFKDÐMOL@BPPÐFKÐQEBÐ4BIA LK
-
trol Mode. How welding is performed in the Manual Mode is explained
from Section 4.4.
Info
Ð&CÐQEBÐJ>@EFKBÐFPÐPBQÐQLÐ*>KR>IÐ*LABÐCRIIVÐJ>KR>IÐTBIAFKDÐ
MOL@BPPÐTFQELRQÐA>Q>ÐILDDFKDOBMLOQÐDBKBO>QFLK ÐQEBÐLMBO>
-
tor can switch it to WeldControl Mode by pressing the
Õ
and
Ö
arrow keys simultaneously.
After all traceability data enabled in the configuration menu were
BKQBOBA ÐQEBÐM>O>JBQBOPÐLCÐQEBÐMFMBPÐQLÐ?BÐTBIABAÐE>SBÐQLÐ?BÐBKQBOBAÐ
If pipe parameters of an earlier welding are available and no code
BOOLOÐT>PÐABQB@QBA Ð>IIÐTBIAFKDÐM>O>JBQBOPÐLCÐQEBÐMOBSFLRPÐTBIAFKDÐ
>OBÐMOLMLPBAÐ>KAÐ@>KÐ?BÐ@LKCFOJBAÐFKÐLKBÐDLÐPBBÐ!FPMI>VÐ
#OLJÐ QEFPÐ AFPMI>V Ð FQÐ FPÐ MLPPF?IBÐ QLÐ @E>KDBÐ QEBÐ MFMBÐ M>O>JBQBOPÐ ?VÐ
pressing the STOP/RESET key. Then the first thing is to select the pipe
material in a list; use the
×
and
Ø
cursor keys and confirm by press-
FKDÐ QEBÐ 01/10"1Ð HBVÐ PBBÐ !FPMI>VÐ Ð 1EBKÐ QEBÐ @ROPLOÐ HBVPÐ >IILTÐ
BKQBOFKDÐQEBÐAF>JBQBOÐ>KAÐQEBÐT>IIÐQEF@HKBPP Ð?LQEÐ@LKCFOJBAÐ?VÐQEBÐ
01/10"1ÐHBVÐPBBÐ!FPMI>VÐÐ&KPQB>AÐLCÐQEBÐT>IIÐQEF@HKBPP ÐVLRÐJ>VÐ
T>KQÐQLÐBKQBOÐQEBÐ0Q>KA>OAÐ!FJBKPFLKÐ/>QFLÐ0!/ÐQEBKÐAFPMI>VÐQEFPÐ
input line instead of the wall thickness line by pressing the
Õ
and
Ö
simultaneously and enter the SDR value. The machine then displays
SELECT PIPE MATERIAL
>PE80
PE100
PP
ENTER PIPE DIMENSION
Pipe Diameter:0250mm
Wallthickness:22.7mm
Pipe Material: PE80
Pipe Diameter:0250mm
Wallthickness:22.7mm
RESET SDR11.0 SET
Display 14
Display 15
Display 16
Weather
>sunny
clear
rain
Display 13
1LÐPQ>OQÐTBIAFKD Ð@I>JMÐQEBÐMFMBPÐFKQLÐQEBÐJ>@EFKBÐ@E>PPFPÐ2PBÐQEBÐ>M
-
propriate reducers if the component size is smaller than the basic machine
chassis. When the third clamp of the machine is fastened to its movable
@>OOF>DB ÐQLÐJLSBÐTFQEÐQEBÐiOPQÐ>KAÐPB@LKAÐMFMBÐ@I>JM ÐQBBPÐ>KAÐBI?LTPÐ
can be clamped for processing into the fourth pipe clamp of the machine.
1EBK ÐQLÐI>RK@EÐQEBÐTBIAFKDÐMOL@BPP ÐMOBPPÐQEBÐ01/10"1ÐHBV
Summary of Contents for WeldControl 2.0 630
Page 2: ......
