78
Navigation X-Press™ Menu
Waypoint [Name]
(Only with an active cursor on a waypoint)
Settings: Edit, Delete, Target, Grid
Waypoint [Name]
allows you to view the Waypoints submenu for the
waypoint under your cursor. You can move the cursor onto an existing
waypoint and press the MENU key once, or use
Cursor to Waypoint
to
select a waypoint from the saved waypoints list.
NOTE:
See
Introduction to Navigation
and the Humminbird® Waypoint
Management Guide for more information.
The Waypoint Submenu includes the following menu options:
Edit
opens the Edit Waypoint dialog box so that you can edit the
selected waypoint. See
Introduction to Navigation
and the
Humminbird® Waypoint Management Guide for more information.
Delete
allows you to delete the waypoint.
Target
applies a target to the waypoint.
Grid
applies a trolling grid to the waypoint.
Cursor to Waypoint
(Chart or Chart Combo View only)
Settings: Press the RIGHT Cursor key and follow
screen instructions.
Cursor to Waypoint
allows you to quickly move the cursor to any saved
waypoint so that you can locate it or edit it. This X-Press™ Menu option only
appears if you have saved waypoints.
Chart Declutter
Settings: Press the RIGHT Cursor key to activate.
Chart Declutter
removes all chart layers except for land outlines, waypoints,
routes, and tracks. The chart will stay decluttered for 10 seconds, and then
it will refresh to its previous display settings. To refresh the view faster than
10 seconds, press the +/– Zoom keys.
NOTE:
See
Chart Menu Tab: Chart Detail Level
for more information.
Save Current Track
Settings: Press the RIGHT Cursor key and follow
screen instructions.
Save Current Track
allows you to save the current track on the display. After
the current track is saved, a new current track is started. Save Current Track
appears on the Navigation X-Press™ Menu after navigation is stopped.
Clear Current Track
Settings: Press the RIGHT Cursor key and follow
screen instructions.
Clear Current Track
allows you to clear the current track on the display and
start a new track at the present position.
NOTE:
To save the depth information with the current track, it is important to
save the track and also edit the name before powering off the control head.
Summary of Contents for 858 HD DI
Page 1: ......
