28
Views
Views
The sonar and navigation information from your Fishing
System is displayed on the screen in a variety of easy-to-
read views. Many of these views are also available as a
Combo View, which shows two views on the screen at the
same time.
•
Default View:
See below for the default view when you first power
up your control head.
858c HD and 958c HD:
Sonar/Chart Combo View
858c HD DI and 958c HD DI:
Down Imaging™ View
858c HD XD and 958c HD XD:
Bird’s Eye View
898c HD SI and 998c HD SI:
Chart/Side Combo View
•
Available Views:
The available Views on your Humminbird® unit will
vary with the model and the transducer attached to your control head.
See
Views Menu Tab
and the following pages for more information.
•
Cycle:
Press the VIEW key to advance to the next view in the View
Rotation. Press the VIEW key repeatedly until the view you want to
use is displayed on the screen.
Press the EXIT key to see the previous view in the View Rotation.
Press the EXIT key repeatedly until the view you want to use is
displayed on the screen.
•
Customize:
You can display or hide any view to suit your fishing
preferences. See the following pages for more information about
each View.
•
Views X-Press™ Menu:
Press and hold the VIEW
key. Use the 4-WAY Cursor Control key to select a
view category (Sonar, Chart, Radar, Data, System)
and a view.
The Views X-Press™ Menu allows you to quickly
access a view instead of scrolling through the
View Rotation.
To customize your view rotation:
You can choose which views are hidden or visible in your view rotation.
1. Press the MENU key twice to access the tabbed Main Menu, then
press the RIGHT Cursor key until the Views tab is selected.
2. Press the UP or DOWN Cursor keys to select a View.
3. Press the LEFT or RIGHT Cursor keys to change the status of the
view from Hidden to Visible or vice versa.
To program each PRESET key:
Another way to access your favorite views quickly is to store them on the
VIEW PRESET keys. Instead of using the VIEW key to cycle through every
view to find the one you want, you can program the VIEW PRESET keys to
display a specific view immediately.
1. Press the VIEW key to cycle to the view you want to store.
2. Press and hold one of the VIEW PRESET keys for several seconds. A
chime will indicate that the view has been saved. You can store up
to three views, one on each key.
Summary of Contents for 858 HD DI
Page 1: ......
