113
NMEA 0183 Output
(Advanced)
Settings: Off, On; Default = Off
NMEA 0183 Output
turns the NMEA* output on or off. NMEA Output
should be turned On if you connect the NMEA Output wires of the GPS
Receiver cable to another NMEA-compatible device, such as an autopilot.
*NMEA 0183 is a National Marine Electronics Association standard for data
communication.
NOTE:
A separate purchase of accessory AS-HHGPS may be required for the
NMEA output function.
The following NMEA sentences are output when NMEA Output is turned On:
DPT - Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
When navigating, the following NMEA sentences are also output when
NMEA Output is turned On:
APB - Autopilot Sentence B
BWR - Bearing and Distance to Waypoint
RMB - Recommended Minimum Navigation Info
Local Sonar
Settings: Off, On, Default = On
Local Sonar
sets whether the Sonar views are shown in the View rotation.
Select Off to deactivate Sonar and remove the Sonar Views from the View
rotation.
NOTE:
This feature may appear as either Sonar or Local Sonar, depending on
your model.
Demonstration
Settings: Off, Visible; Default = Visible
Demonstration
controls whether the Demonstration Mode is visible or off.
The Demonstration Mode appears on the screen if you don’t press any keys
during the warning screen at power up. Menu settings cannot be saved in
Demonstration (see
Power On
and
Start-Up Options Menu
).
Sound Control
Settings: No Sounds, Alarms Only, All Sounds;
Default = All Sounds
Sound Control
allows you to set when the control head will beep or sound
because of key presses and/or alarms.
Video Out
Settings:
Domestic
Models:
NTSC,
Off;
International Models: NTSC, PAL, PAL-M, Off;
Default = Off
Video Out
allows you to set the video format that will be sent to your remote
monitor.
Setup Menu Tab
Summary of Contents for 858 HD DI
Page 1: ......
