74
Down Imaging™ X-Press™ Menu
Cancel Navigation
(only when Navigating)
Settings: Press the RIGHT Cursor key and follow
screen instructions.
Cancel Navigation
discards the current route and exits Navigation Mode.
This menu option will only appear when you are currently navigating a route.
This will not delete a previously-saved route.
Active Side
(Combo Views only)
Settings: Left, Right, Default = Left
Active Side
allows you to select a side of the screen in a Combo View. After
you choose an active side, you can apply menu settings and key commands
to the view you’ve selected. The Active Side menu option is only available
when a Combo View is on the screen (see
Views: Combo Views
).
• A green arrow on the Combo View points to the active side.
• When a menu is displayed in the active side, the non-active side of
the screen will be grayed out.
Split Position
(Combo Views only)
Settings: Left, 30, 40, 50, 60, 70, Right,
Default = Various
Split Position
sets the size of the left side of the Combo View. Each Combo
View can be set individually. The Split Position menu option is only available
when a Combo View is on the screen (see
Views: Combo Views
).
• The number setting indicates the percentage taken up by the left
side of the Combo View.
• Selecting Left sets the left side of the screen to its smallest setting.
Down Sensitivity
Settings: 1 to 20, where Low = 1, High = 20,
Default = 10
Down Sensitivity
controls how the sonar returns are displayed on the Down
Imaging™ Views.
Increase the Down Sensitivity
to reveal weaker returns that may be of
interest, especially in very clear water or greater depths. A high Down
Imaging™ Sensitivity setting shows more sonar returns from small baitfish
and suspended debris in the water; however if the Down Imaging™
Sensitivity is adjusted too high, the display may become too cluttered.
Decrease the Down Sensitivity
to eliminate the clutter from the display that
is sometimes present in murky or muddy water. If Down Imaging™
Sensitivity is adjusted too low, the display may not show many sonar returns
that could be fish.
DI Enhance
Settings: Press the RIGHT Cursor key.
DI Enhance
allows you to adjust your Down Imaging™ View in the following
categories: Sensitivity, Contrast, and Sharpness.
Whether you’re searching the Down Imaging™ data for fish or certain
bottom contour, the most effective settings will vary with the situation. The
display will update as you adjust each category. DI Enhance can also be used
during Recording Playback (see
Views: Snapshot and Recording View
).
Summary of Contents for 858 HD DI
Page 1: ......