Humminbird 858 HD DI, Operation Manual

Page: 50 / 142

40 Views
NOTE: Sonar chart speed is increased during Fast Forward and reversed during
Rewind. This may reduce the quality of the sonar image, since at higher speeds,
not every sonar return can be processed and displayed.
Side Beam View
(with optional-purchase QuadraBeam PLUS™ transducer)
Side Beam View displays sonar data from the left and right 455 kHz beams
and the 200 kHz down-looking beam in one view. This view is available if an
optional-purchase QuadraBeam PLUS™ transducer accessory is connected
and Connected Transducer is set to QuadraBeam (see
Sonar Menu Tab:
Connected Transducer ).
NOTE: The QuadraBeam PLUS™ transducer requires a separate purchase.
• Bottom View: The sonar information from the side-looking beams
reveals bottom contour, structure, and fish similar to the down-
looking beam, but the area covered is to the left and right, which
gives you a wider view of the bottom.
• Distance: The distance covered by the right and left side-looking
beams is controlled by the Lower Range setting for the down-looking
beam, up to a maximum of 160 feet (see
Sonar X-Press™ Menu:
Lower Range ).
• Settings: The Side Beam View can be arranged in any of the
following layouts: Default, Classic, and Slanted. To select a layout,
press the MENU key once to access the Sonar X-Press™ Menu. Scroll
down using the DOWN Cursor key until Quad Layout is highlighted.
Then press the LEFT or RIGHT Cursor keys to select a layout setting.
Recording Information
Recording Indicator Current Ping Rate
1
2
5
6
1 6
Amount of space and time used by this recording Average Ping Rate 2 7
Name of recording Amount of space remaining on card
3
8
Time and Date recording was started Total amount of space on card
4 9
Position where recording was started
5 10
3 4
7
8
8
9