Human Elisys Quattro, User Manual

Page: 79 / 88

Error Messages
ELISYS QUATTRO User Manual HUMAN 7-5
Table 7-1: General Error Messages
Verification failed %1 The reader has failed the validation
criteria. Replace the photometer lamp. Repeat
validation. If this error persists, call
service.
Washer %1 motor not
homed Error in washer motor. Select the menu item Utilities |
Selftest to initialise the system
again. If the error persists, call service.
Washer aspirate
pump error Error in washer aspirate pump. Confirm displayed message by pushing
the Retry button. If error recurs, push
the Ignore button. Upon completion
of the run or unlocking of the washer
drawer, check if the aspirate bottles are
closed correctly. If the error persists,
call service.
Washer dispense
pump error Error in washer dispense pump. Confirm displayed message by pushing
the Retry button. If error recurs, push
the Ignore button. Select the menu
item Utilities | Selftest to initial-
ise the system again. If the error per-
sists, call service.
Washer EEPROM
error Error in EEPROM of the washer
module. Call service.
Washer head home
movement error Error when moving washer head to
home position. Select the menu item Utilities |
Selftest to initialise the system
again. If the error persists, call service.
Washer head motor
movement error Error in movement motor of the
washer head. Select the menu item Utilities |
Selftest to initialise the system
again. If the error persists, call service.
Washer plate home
movement error Error when moving to the home
position. Select the menu item Utilities |
Selftest to initialise the system
again. If the error persists, call service.
Washer plate motor
movement error Plate transport motor of washer
blocked. Select the menu item Utilities |
Selftest to initialise the system
again. If necessary, take out the plate
that may still be in the washer. If the
error persists, call service.
Washer reagent level
low error The wash buffer runs low. Refill the wash buffer. Push the Retry
button. Then you may continue.
Washer valve test
error Error in testing the pump valve.
Valve does not switch. Call service.
Washer waste full Container for washer waste full. Empty container.
Washer waste pump
error Error in washer waste pump. Check connections and container caps
for leaks. If the error persists, call serv-
ice.
Error: Cause: Action: