Human Elisys Quattro, User Manual

Page: 80 / 88

7-6 ELISYS QUATTRO User Manual HUMAN
Error Messages
7.2 Error Messages of Components
The following error codes have been assigned to the individual system modules. An
error code consists of six parts: IDxx03xx4552nnnn
•
ID: ID number of the module
• xx: Insignificant
• 03: Error
• xx: Insignificant
• 4552: Start of the error number
• nnnn: Error number, sometimes there are only two numbers
Example: 42xx03xx45524243 means: Module 42, error number 4243. In the follow-
ing tables you find this error display under the module number and the error code.
Call service for errors, which were not specified!
Module 41
Virtual Module
Table 7-2: Module 41 - Virtual module
Module 42
Plate transport
Module
ID: Error
number:
Cause: Action
41 46 System fluid low. Refill the system fluid container.
41 57 System waste container is full. Empty the system waste container.
Module
ID: Error
number:
Cause: Action
42 41 Argument error in command. Check that the firmware is the correct
version for the version of software being
run.
42 42 Plate transport bar code IC error. Replace the plate transport barcode
scanner.
42 42 43 The plate bar code scanned was not
what was expected. Replace the plate with the correct one.
42 44 Plate load/unload door is open while try-
ing to move. Close the plate load/unload door. Check
the connectors to the switch.
42 48 nn Motor not home. nn shows the position. None. The software will reset the plate
transport and try again.