Human Elisys Quattro, User Manual

Page: 50 / 88

4-18 ELISYS QUATTRO User Manual HUMAN
Performing a Test Run
4.4.6 Starting and Processing a Run
4.4.6.1 Clot Detection Error Handling
As soon as all plates have been loaded, the system
starts the run. All loading doors must be closed so
that the run can be started!
The plates are processed in accordance with the
defined process steps of the selected assays.
During the run all worklist options
(see chapter 4.4.1 on
page 4-9) can be viewed. In the Schedule mode
the current time and thus the current operation is
marked by a vertical indicator.
At the end of the entire run the system prompts you
to unload plates. Unload plates one by one. Results
can be viewed as soon as all plates have been
unloaded.
Dependent on the attitude in the test definition
("Raise alarm and stop", "Log and continue" or "Man-
ual pipette at end of step") the error handling is differ-
ent at a clot detection.
Action on error "Raise alarm and stop"
If a clot is detected, the system stops and shows a
message with the following buttons:
Skip Sample:
• The pipettor moves to the eject position to
remove the tip.
• Entry in the Eventlog.
• The next sample will be pipetted.
• The result file flags all samples with “Clot
detected” where a clot was detected.
Abort Plate:
• An additional message comes up to confirm the
plate abort process.
• The pipettor moves to the Eject position to
remove the tip.
• If available, the next sample of the next plate will
be pipetted.
Continue:
• The sample is pipetted into the appropriate well of
the micro plate.
• The result file flags all samples with “Clot
detected” where a clot was detected.