Human Elisys Quattro, User Manual

Page: 45 / 88

Performing a Test Run
ELISYS QUATTRO User Manual HUMAN 4-13
4.4.2.1 Loading Bar Coded Patient Samples and Reagents
Always load racks from right to left.
4.4.2.2 Allocation of Non-bar Coded Reagents and Samples
The sample and reagent area on the screen are
empty.
The required resources are displayed as circles in
different colours in the top right corner of the screen.
You can view the respective name by moving the
cursor over these circles. An inserted rack is
depicted graphically and the loaded resources are
automatically allocated.
1. Right LED lights up red.
2. Insert first rack into the right track.
3. The bar codes are read and the rack and the
available reagents are identified.
4. If the rack has been inserted properly up to the
limit stop the LED goes off. On the screen, the
loaded resources from the pool of unallocated
resources are allocated to the inserted rack
(marked with a cross in the rack position), since
they are bar coded and are therefore identified.
5. The next empty track is marked by a red LED.
Proceed as described in the preceding step (see
chapter 5 on page 5-1) .
The sample and reagent area on the screen is
empty.
After insertion of the racks
only the rack types with
empty positions are depicted. Unallocated but
required resources are displayed as circles in differ-
ent colours in the top right corner of the screen. You
can view the respective name by moving the cursor
over these circles.