Human Elisys Quattro, User Manual

Page: 38 / 88

4-6 ELISYS QUATTRO User Manual HUMAN
Performing a Test Run
If you did not enter any patient codes before creating the worklist this window
does not contain any patients. In this case you can assign assay/patients via
the
Patient Details...
button in the
Set-up Panel
dialogue box.
If a sample is already assigned to the worklist it disappears from the
Select
Patient(s)
dialogue.
To run the same patient with the same assay on more then one plate the op-
tion
Allow multiple determinations
must be selected.
4. Click on the Add Assay... button.
The Open dialogue box shows all available
assay files (*.asy) in the selected subdirectory.
5. Select the desired assay file.
6. Click on the Open button.
The plate panel pre-defined in the selected assay
protocol is entered into the plate depicted in the
Set-up Panel dialogue box (except tests). In the
Explorer tree the assay protocol is displayed as a
folder.
7. Click on the Add Patient... button to assign
the patients to the selected assay.
The Select Patient(s) dialogue box
appears. It contains only the patient IDs for which
the respective assay has been selected in the
Patient Editor.
The dialogue indicates all patients with a ’*’,
which are already loaded on the instrument.
8. Select patients with the mouse or press on the
Select All button to select all of the loaded
samples to the worklist.
9. Click on the Ok button.