Human Elisys Quattro, User Manual

Page: 37 / 88

Performing a Test Run
ELISYS QUATTRO User Manual HUMAN 4-5
4.3 Worklist Definition
4.3.1 Create New Worklist
1. Click the New| Worklist button (or select
File | New and then select Worklist in the
dialogue box).
2. The Set-up Panel dialogue box is displayed.
• In case of
non-bar coded samples this dialogue
box is empty, as shown in the figure to the right.
• With bar coded samples a worklist with plates,
assays and patients is suggested in accordance
with the assignment of the assays to the samples
and displayed in the Explorer tree, using one
assay per plate.
Click on the OK button to accept this proposal
and proceed with defining several plates
(see
chapter 4.3.3 on page 4-8) or with input of reagent
data (see chapter 4.3.4 on page 4-8) .
If the proposal is modified, the plate panel has to
be deleted with Delete and a new plate panel
has to be defined.
In the Set-up Panel dialogue box the plate(s)
and the plate layout are defined for the selected
worklist via the top 3 buttons. Click on the Undo
button to undo the last step. Click on the Open
Panel button to open a stored plate panel. Click on
the Save Panel button to save the defined plate
panel. The assigned patients are not stored.
3. Click on the Add Plate... button.
Plate 1 is entered in the Explorer tree.