Human Elisys Quattro, User Manual

Page: 40 / 88

4-8 ELISYS QUATTRO User Manual HUMAN
Performing a Test Run
4.3.3 Defining Several Plates
4.3.4 Input of Reagent Data
The different assay tabs must be selected by hand!
1. Click on the Add Plate... button.
2. Click on the Add Assay... button and select
an assay protocol (see chapter 4.3.1 on page 4-5) .
3. Click on the Add Patient... button and select
patients.
The expanded Explorer tree is displayed along
with plate 2 showing the panel of the active
assay.
4. Repeat this steps for further plates.
Further possibilities:
• Click on the plus sign of an plate folder to view
the respective assays in the Explorer tree.
• Click on the plus sign of an assay folder to view
the respective patient IDs in the Explorer tree.
• Change the order of plates via the Move Up
and Move Down buttons.
1. After all required plates have been defined in the
Set-up Panel dialogue box, click OK to
close the dialogue box.
The Lot Specific Values For: Plate 1
dialogue box for of the active worklist is dis-
played. It includes a tab for each assigned assay,
listing the required reagents for the respective
assay
2. For this assay and - if available - for the other
assays on this plate, that are located on further
tabs , you have to enter the lot-specific data.
3. Click on the OK button.
The first assay of the next plate is displayed. This
and possibly following assays and plates have to
be treated as described above.
After the last plate the Worklist window is dis-
played
(see next chapter).