Huber MPC TC 100, Operation Manual

Page: 44 / 48

Shutting down
OPERATION MANUAL Chapter 8
Immersion Cooler
V2.3.0en/03.08.21//1.30
44
8.6 Shipping
Temperature control unit transported in a horizontal position
DAMAGE TO THE COMPRESSOR

Only transport the temperature control unit in an upright position.
Temperature control unit transported incorrectly
PROPERTY DAMAGE

Do not transport by truck on the castors or feet.

Comply all requirements in this section to avoid damage to the temperature control unit.
Transport using the lugs, if fitted, on the top of the temperature control unit. Do not transport the
temperature control unit alone and without aids.
▪ Always use the original packaging for transportation.
▪ Indicate the upright transport position with arrows on the packaging.
▪ Always transport the temperature control unit upright on a pallet!
▪ Protect attachments from damage during transportation!
▪ During transport, place the temperature control unit on squared timber to protect the casters/feet.
▪ Secure with tensioning belts/lashing straps that are suitable for the weight.
▪ Additionally secure (depending on model) with plastic film, cardboard and straps.
8.7 Disposal
Uncontrolled or incorrect opening of the coolant circuit
RISK OF INJURY AND ENVIRONMENTAL DAMAGE

Work on the coolant circuit and disposal of the refrigerant must be carried out by approved
refrigeration/air-conditioning system contractors.
Improper disposal
ENVIRONMENTAL DAMAGE

Spilled/leaked thermal fluid must be discarded immediately and correctly. Observe the proper disposal of
thermal fluid and aids. → Page 15 the section »Proper disposal of resources and consumables« .

To avoid environmental damage, have “disused” temperature control units disposed of exclusively
by approved waste management companies (e.g. refrigeration and air conditioning companies).
Pallet with squared
timber for free-
standing units