Huber MPC TC 100, Operation Manual

Page: 30 / 48

Function description
OPERATION MANUAL Chapter 3
Immersion Cooler
V2.3.0en/03.08.21//1.30
30
3 Function description
3.1 Function description of the temperature control unit
3.1.1 General functions
The temperature control unit is especially suited for cooling applications.
The temperature control unit is solely intended as a cooling device and must not be used for heat-
ing.
3.1.2 Other functions
Valid for temperature control units with MPC controller:
The LED display shows the current temperature. A new setpoint can be easily entered with a simple
keyboard.
A connection jack for Pt100 process controller sensor enables you to accomplish external tempera-
ture control tasks with ease.
3.2 Information on the thermal fluids
Non-compliance with the safety data sheet for the thermal fluid to be used
INJURIES

Risk of injury to the eyes, skin, respiratory tract.

The safety data sheet for the thermal fluid to be used must be read prior to using it and its
content must be respected.

Observe the local regulations/work instructions.

Wear your personal protective equipment (e.g. temperature-resistant safety gloves, safety
goggles, safety footwear).

Danger of slipping because floor and work area are contaminated. Clean the workplace; ob-
serve the proper disposal of thermal fluid and aids. → Page 15, section »Proper disposal of re-
sources and consumables« .
Non-compliance with the compatibility between the thermal fluid and your temperature control
unit
MATERIAL DAMAGE

Observe the classification of your temperature control unit according to DIN 12876.

Ensure the following materials are resistant with respect to the thermal fluid: Stainless steel
1.4301/ 1.4401 (V2A).
Mixing different thermofluids in a thermal fluid circuit
PROPERTY DAMAGE

Do not mix different types of thermofluid (such as mineral oil, silicone oil, synthetic oil, water,
etc.) in a thermofluid circuit.

The thermal fluid circuit must be rinsed when changing from one type of thermal fluid to an-
other. No residues of the previous type of thermal fluid may remain in the thermal fluid circuit.
Designation Specification
Thermal fluid: Water without ethylene glycol
Use do not use
Thermal fluid: Water-ethylene glycol mixture
Use do not use
For thermal fluids we recommend the media listed in the Huber catalog. The name of a thermal
fluid is derived from its working temperature range and its viscosity at 25 °C.
Thermal fluid: Water