Huber MPC TC 100, Operation Manual

Page: 33 / 48

Function description
Chapter 3 OPERATION MANUAL
V2.3.0en/03.08.21//1.30
Immersion Cooler
33
Setting Display Description
0 The auto-start function is turned on.
1 The auto-start function is turned off.
PROCEDURE

Press the
>Arrow keys<
[C] and simultaneously for 3 seconds. The display changes from
the display of the temperature to the display of the first menu item.

Press the
>Arrow key<
[C] until the menu item “C40” is displayed.

Press the
>SET key<
[D] and keep it pressed.

Press the
>SET key<
[D] and simultaneously the
>Arrow keys<
[C] and . The display changes
from “0” (auto-start function is ON) to “I” (auto-start function is OFF). Release the
>SET key<
[D]
after the required setting was made.

Press the
>Arrow keys<
[C] and simultaneously for 1 second. Or wait a few seconds after
releasing the
>SET key<
[D]. The selected function is saved and menu is exited. The display shows
the temperature again.
Settings in the menu
item “C40” auto-start
function