Huber MPC TC 100, Operation Manual

Page: 41 / 48

Service/maintenance
Chapter 7 OPERATION MANUAL
V2.3.0en/03.08.21//1.30
Immersion Cooler
41
A standard stainless steel cleaning agent is suitable for cleaning the stainless steel surfaces. Carefully
clean painted surfaces (damp only) using a solution of sensitive-fabrics detergent. Observe the
proper disposal of thermal fluid and aids. → Page 15, section »Proper disposal of resources and
consumables« .
7.5 Plug contacts
Exposed plug contacts
DAMAGE CAUSED BY FLUID INGRESS

Protect unused plug contacts with the protective caps supplied.

Clean surfaces only with a damp cloth.
Protective caps are supplied for all plug contacts. Make sure that any plug contacts not required are
protective with the caps.
7.6 Decontamination/repairs
Returning a not decontaminated temperature control unit for repair
PHYSICAL INJURY AND PROPERTY DAMAGE CAUSED BY HAZARDOUS MATERIALS IN OR ON THE
TEMPERATURE CONTROL UNIT

Carry out appropriate decontamination.

The decontamination process depends on the type and quantity of the materials used.

Consult the relevant safety data sheet.

You will find a prepared return receipt at www.huber-online.com.
As the responsible body you are responsible for carrying out decontamination before third-party
personnel come into contact with the temperature control unit / accessory. Decontamination must
be carried out before the temperature control unit / accessory is returned for repair or inspection.
Attach a clearly visible written notice stating that the temperature control unit / accessory has been
decontaminated.
To simplify the process, we have prepared a form for you. This is available for download at
www.huber-online.com.