Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-65
failure. The source address is normally recommended to be a loopback interface
address.
z
This command specifies only one source address; therefore, the newly
configured source address may overwrite the original one.
Related command:
nas-ip
.
Example
# Configure the router to send
hwtacacs
packets from 129.10.10.1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs nas-ip 129.10.10.1
1.3.5 hwtacacs scheme
Syntax
hwtacacs scheme
hwtacacs-scheme-name
undo hwtacacs scheme
hwtacacs-scheme-name
View
System view
Parameter
hwtacacs-scheme-name
: Specifies an HWTACACS server scheme, with a character
string of up to characters.
Description
Use the
hwtacacs scheme
command to create an HWTACACS scheme and enter its
view.
Use the
undo hwtacacs scheme
command to delete the HWTACACS scheme.
By default, no HWTACACS scheme exists.
Note:
If Fabric is enabled on the switch, you cannot create an HWTACACS scheme
because they are exclusive to each other.
Example
# Create an HWTACACS scheme named "hwt1" and enter the relevant HWTACACS
view.