Command Manual - HWPing
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 HWPing Commands
Huawei Technologies Proprietary
1-3
Example
# Use the
display hwping results
command to display the test result of the test group
whose administrator name is “administrator” and operation tag is “icmp”.
<Quidway> display hwping results administrator icmp
HWPing entry(admin administrator, tag icmp) test result:
Destination ip address:1.1.1.99
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 2/5/2
Square-Sum of Round Trip Time: 66
Last complete test time: 2000-4-2 7:59:54.7
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
Table 1-1
Description on the fields of the
display hwping results
command
Field
Description
Destination ip address
Destination IP address
Send operation times
Number of times the operation is sent
Receive response times
Number of times of the successful test
operations
Min/Max/Average Round Trip Time
Smallest/biggest/average round-trip time
Square-Sum of Round Trip Time
The square sum of the round trip time
Last complete test time
Time of the last successful test
SD Maximal delay
Maximal delay from the source to the
destination
DS Maximal delay
Maximal delay from the destination to the
source
Packet lost in test
Packet lost ratio in the test.
Disconnect operation number
Number of times of disconnections by the
opposite side