Command Manual – 802.1x
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-1
Chapter 1 802.1x Configuration Commands
1.1 802.1x Configuration Commands
1.1.1 display dot1x
Syntax
display dot1x
[
sessions
|
statistics
] [
interface interface-list
]
View
Any view
Parameter
sessions
: Displays the formation about 802.1x sessions.
statistics
: Displays the statistics information about 802.1x.
interface
: Display the 802.1x-related information about a specified port.
interface-list
: Ethernet port list. You can specify multiple Ethernet ports by providing
this argument in the form of
interface-list
= {
interface-name
[
to
interface-
name
] & <
1-10 >. The
interface-name
argument is the port index of an Ethernet port and can be
specified in this form:
interface-name
= {
interface-type
interface-num
}, in which,
interface-type
specifies the type of an Ethernet port and
interface-num
identifies the
number of the port. Note that the
interface name
after the keyword
to
must have an
interface-num
that is greater than or equal to that of the
interface-name
before
to
.
“&<1-10>” means that up to 10 port indexes/port index lists
can be provided.
Description
Use the
display dot1x
command to display 802.1x-related information, such as
configuration information, operation information (session information), and statistics.
When the
interface-list
argument is not provided, this command displays
802.1x-related information on all ports. The output information can be used to verify
802.1 x-related configurations and to troubleshoot.
Related commands:
reset dot1x statistics
,
dot1x
,
dot1x retry
,
dot1x max-user
,
dot1x port-control
,
dot1x port-method
, and
dot1x timer
.
Example
# Display 802.1x-related configuration information.
<Quidway> display dot1x
Equipment 802.1X protocol is enabled
