Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510
Chapter 1 HGMPv2 Configuration Commands
Huawei Technologies Proprietary
1-4
1.1.2
ndp enable
Syntax
ndp enable
[
interface port-list
]
undo ndp enable
[
interface port-list
]
View
System view, Ethernet port view
Parameter
interface port-list
: Specifies a list of ports. The list can contain consecutive or
separated ports, or the combination of the both. You need to provide the
port-list
argument in the form of
interface-type interface-number
[
to
interface-type
interface-number
] &<1-10>, where
interface-type
specifies the port type, and
interface-number
specifies the port number (in the form of slot number/port number).
to
:
Specifies a port range. &<1-10> means that you can provide up to ten port indexes/port
index ranges for this argument.
Description
Use the
ndp enable
command to enable NDP globally or on a port.
Use the
undo ndp enable
command to disable NDP globally or on a port.
When the
ndp enable
command is executed in system view, the NDP feature is
enabled globally if the
port-list
argument is not specified, while the NDP feature is
enabled on the specified port if the
port-list
argument is specified. When the
ndp
enable
command is executed in Ethernet port view, the NDP parameters cannot be
entered and the NDP feature can be enabled on the current port only.
By default, NDP is enabled both globally and on an Ethernet port.
Note that the NDP feature on a port does not take effect until the NDP feature is
enabled globally.
Example
# Enable NDP globally.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ndp enable
1.1.3
ndp timer aging
Syntax
ndp timer aging aging-in-secs