Command Manual – 802.1x
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-3
Authentication Mode is Auto
Port Control Type is Mac-based
Max number of on-line users is 256
Authentication Success: 0, Failed: 0
EAPOL Packets: Tx 0, Rx 0
Sent EAP Request/Identity Packets : 0
EAP Request/Challenge Packets: 0
Received EAPOL Start Packets : 0
EAPOL LogOff Packets: 0
EAP Response/Identity Packets : 0
EAP Response/Challenge Packets: 0
Error Packets: 0
Controlled User(s) amount to 0
Ethernet1/0/3
……
Table 1-1
Description on the fields of the
display dot1x
command
Field
Description
Equipment 802.1X protocol is
enabled
802.1x protocol (802.1x for short) is enabled on
the switch.
CHAP authentication is enabled CHAP authentication is enabled.
DHCP-launch is disabled
DHCP-triggered.802.1x authentication is disabled.
Proxy trap checker is disabled
Whether to check a supplicant system that logs in
through a proxy:
z
Disable means the switch does not send Trap
packets when it detects that a supplicant
system logs in through a proxy.
z
Enable means the switch sends Trap packets
when it detects that a supplicant system logs in
through a proxy.
Proxy logoff checker is disabled
Whether to check a supplicant system that logs in
through a proxy:
z
Disable means the switch does not disconnect
a supplicant system when it detects that the
latter logs in through a proxy.
z
Enable means the switch disconnects a
supplicant system when it detects that the latter
logs in through a proxy.
Transmit Period
Setting of the Transmission period timer (the
tx-period)