Command Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Information Center Configuration
Commands
Huawei Technologies Proprietary
1-12
This command works only when the information center is enabled for the system.
Related command:
info-center enable
and
display info-center
.
Example
# Set channel 0 to send information to user terminal.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center monitor channel 0
1.1.13 info-center snmp channel
Syntax
info-center snmp channel
{
channel
-
number | channel
-
name
}
undo info-center snmp channel
View
System view
Parameter
channel
-
number
: Channel number, ranging from 0 to 9, corresponding to the 10
channels of the system.
channel
-
name
: Channel name, by default, the name of channel 0 to channel 9 is (in
turn)
console
,
monitor
,
loghost
,
trapbuffer
,
logbuffer
,
snmpagent
,
channel6
,
channel7
,
channel8
,
channel9
.
Description
Use the
info-center snmp channel
command to set the channel through which
information is output to the SNMP.
Use the
undo info-center snmp channel
command to restore the default channel
through which information is output to the SNMP, that is, channel 5.
Related command:
snmp-agent
and
display info-center
.
Example
# Set the switch to output information to the SNMP agent through channel 6.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center snmp channel 6