Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-5
View
Any view
Parameter
None
Description
Use the
display rip routing
command to display RIP routing information.
Example
# Display RIP routing table information.
<Quidway> display rip routing
RIP routing table: public net
A = Active I = Inactive G = Garbage collection
C = Change T = Trigger RIP
Destination/Mask Cost NextHop Age SourceGateway Att
192.168.110.0/24 1 31.31.31.8 7s 31.31.31.8 A
200.1.1.0/24 1 31.31.31.8 7s 31.31.31.8 A
130.1.0.0/16 1 31.31.31.8 7s 31.31.31.8 A
Table 2-3
Description on the fields of the
display rip routing
command
Field
Description
Destination/Mask Destination address/Mask
Cost Cost
NextHop
Net hop address
Age
Amount of time that elapsed after the route is
advertised
SourceGateway
Gateway originating the route
Output
Indicates whether to allow the interface to send
RIP packets ("on" means yes; "off" means no).
Split-horizon
Indicates whether split horizon is enabled ("on"
means yes; "off" means no)
2.1.6 filter-policy export
Syntax
filter-policy
{
acl-number
|
ip-prefix ip-prefix-name
}
export
[
routing-protocol
]